2017 Dime Coin Value (Errors List, “D”, “S” & “P” Mint Mark Worth)

The 2017 Roosevelt Dime continues the legacy of one of America’s longest-running coin designs, marking over seven decades of honoring President Franklin D. Roosevelt. While these dimes remain common in daily life, their numismatic value varies based on mint mark, condition, and special editions.

Circulation strikes from Philadelphia and Denver facilities can range from face value to $6.55 in top uncirculated grades. Meanwhile, proof editions from San Francisco command prices around $14.00 for Deep Cameo specimens, reflecting their limited production and superior strike quality.

 

2017 Dime Value By Variety

The value of 2017 dimes varies significantly across numismatic grades, ranging from circulated Good condition to pristine Proof specimens, reflecting the importance of preservation in coin collecting. If you know the grade of your coin, you can find the exact price below in the Value Guides section.

Also Read: Roosevelt Dime Value (1946-Present)

 

Top 4 Most Valuable 2017 Dime Worth Money

The 2017-P dime graded at MS-68 leads the value chart at $295, representing the highest price point among all 2017 varieties. This reflects the challenge of locating circulation strikes in near-perfect condition.

The San Francisco proof coins (PR-69 and Silver PR-69) are valued at $45 each. These were struck specifically for collectors using polished dies and planchets, resulting in mirror-like surfaces and sharp details.

Both proof varieties achieve similar valuations despite their different compositions. The regular clad proof and 90% silver proof versions were produced in limited quantities with careful handling protocols.

The 2017-D MS-66 is valued at $33, representing a more accessible entry point for collectors. Denver’s high production volume means more uncirculated examples have survived in collectible grades.

 

History of The 2017 Dime

The year 2017 marked the 225th anniversary of the United States Mint, which was established through the Coinage Act of 1792. This milestone held profound significance for American numismatics, representing over two centuries of continuous coin production since the nation’s founding era.

To celebrate this anniversary, the U.S. Mint issued a special 2017-S Enhanced Uncirculated Coin Set on August 1, 2017. This commemorative offering introduced a distinctly new finish technique to American coinage.

The Enhanced Uncirculated finish utilized a combination of laser frosted areas and an unpolished field that accentuated design details, creating a unique contrast distinctly different from the mirror-like finish of proof coins. This represented an innovative approach to specialty coin production.

The set contained ten different coins, all struck at the San Francisco Mint, including the Roosevelt Dime, Lincoln Cent, Jefferson Nickel, five America the Beautiful Quarters, and Kennedy Half Dollar. Each coin bore the “S” mint mark, distinguishing these special strikes from regular circulation issues.

Beyond the Enhanced Uncirculated Set, 2017 Roosevelt dimes were also produced in circulation strikes at Philadelphia and Denver facilities, alongside traditional proof editions from San Francisco. This multi-format production strategy reflected the Mint’s dual mission of serving both everyday commerce and the collecting community, ensuring accessibility across all numismatic interests.

Also Read: Top 100 Most Valuable Roosevelt Dimes Worth Money List

 

Is Your 2017 Dime Rare?

Determining whether your 2017 dime qualifies as a collectible rarity requires careful examination. Our CoinValueChecker App instantly analyzes these critical factors, providing professional rarity assessments and current market valuations within seconds.

 

Key Features of The 2017 Dime

The 2017 Roosevelt dime maintains the design essentially unaltered from Chief Engraver John R. Sinnock’s original 1946 creation. Understanding these enduring design elements proves essential for authentication, grading assessment, and identifying the distinctive characteristics that define this commemorative year’s production.

The Obverse Of The 2017 Dime

The obverse features a left-facing profile portrait of President Franklin D. Roosevelt, with “LIBERTY” appearing along the upper left edge in front of his face. The motto “IN GOD WE TRUST” is positioned in smaller letters below Roosevelt’s chin.

Chief Engraver John R. Sinnock placed his initials “JS” at the base of Roosevelt’s neck truncation. The date “2017” appears at the lower right, with the mint mark positioned directly above the date on Philadelphia and Denver strikes, while San Francisco special editions bear the “S” mark.

The Reverse Of The 2017 Dime

The reverse shows a torch in the center representing liberty, flanked by an olive sprig representing peace on the left and one of oak symbolizing strength and independence on the right.

The inscription “E PLURIBUS UNUM” stretches across the field between these symbolic elements. The legends “UNITED STATES OF AMERICA” and “ONE DIME” surround the reverse design in arcs along the periphery.

Collectors particularly value specimens displaying “Full Bands” designation, where the horizontal bands across the torch remain completely unbroken and sharply defined.

Other Features Of The 2017 Dime

The 2017 dime measures 17.90 millimeters in diameter and 1.35 millimeters in thickness, making it the smallest and thinnest circulating U.S. coin. Weighing 2.27 grams, the coin features a reeded edge comprising 118 individual reeds.

The composition consists of outer layers of 75% copper and 25% nickel bonded to a pure copper core, the standard clad formula employed since 1965.

Also Read: Top 100 Rarest Dimes Worth Money (Most Expensive)

 

2017 Dime Mintage & Survival Data

The 2017 mintage data presented represents Full Bands (FB) production across three minting facilities. Philadelphia produced 1,437,500,000 pieces while Denver struck 1,290,500,000 pieces for circulation purposes.

San Francisco’s production focused on collector editions with specialized finishes. The clad proof with Deep Cameo designation reached 621,384 pieces, and the silver proof with Deep Cameo finish totaled 406,994 pieces.

The survival rates remain listed as “unknown” primarily due to the coin’s recent production date. As a modern issue from 2017, most specimens continue circulating in commerce or remain stored in their original mint packaging.

Unlike historical coins where decades of attrition, melting, and loss have established clearer survival estimates, 2017 dimes have not experienced enough time for meaningful population data to develop. The majority of circulation strikes remain in active use, while proof editions typically stay preserved in collector holdings.

Also Read: Top 70+ Most Valuable Mercury Dimes Worth Money (Chart By Year)

 

The Easy Way to Know Your 2017 Dime Value

Exploring your 2017 dime’s value requires examining three critical factors: mint mark location, preservation condition, and strike quality characteristics. Circulated examples typically hold face value, while uncirculated specimens in MS-65 grade reach approximately $1.50 to $2.50. Full Bands specimens showing complete horizontal lines across the torch bands command premiums over similarly graded examples.

Rather than navigating complex grading standards and market pricing databases manually, our CoinValueChecker App streamlines the entire process through instant photo recognition. Simply capture an image of your coin to receive immediate grade estimates, mint mark verification, and current market valuations based on real auction data and professional assessments.

 

2017 Dime Value Guides

The 2017 Roosevelt Dime was produced in four distinct varieties:

• 2017-P Dime (Philadelphia circulation strike with over 1.4 billion minted; Full Bands designation drives premium values)
• 2017-D Dime (Denver circulation strike with 1.29 billion produced; accessible for variety hunting and Full Bands examples)
• 2017-S DCAM Dime (San Francisco proof in copper-nickel clad composition; exclusive to annual proof sets with mirror finish)
• 2017-S Silver DCAM Dime (San Francisco proof in 90% silver composition; distributed only in Silver Proof Sets with precious metal content)

Building a complete 2017 Roosevelt Dime collection requires understanding the four distinct varieties produced that year. Each type serves different collecting goals, from affordable circulation pieces to premium silver proofs, offering collectors flexibility based on budget and interest.

 

2017-P Dime Value

The 2017-P Roosevelt Dime represents the Philadelphia Mint’s circulation strike production for that year. With a mintage exceeding 1.4 billion pieces, these coins were distributed nationwide for everyday commerce.

The “Full Bands” designation marks a critical distinction in value for these dimes. This grading notation requires complete separation of both the upper and lower horizontal bands on the torch featured on the coin’s reverse. The bands must show unbroken lines with clear definition between them.

Most 2017-P dimes show incomplete torch details due to die wear during the minting process. As millions of coins were struck from the same dies, the fine details gradually weakened. This makes well-struck examples with Full Bands considerably harder to locate.

A 2017-P graded MS68 with Full Bands achieved $295 at auction in August 2018. In comparison, the same coin without the Full Bands designation typically brings around $90 in MS68 condition. This price gap reflects the scarcity of properly struck circulation pieces.

Market activity demonstrates consistent collector interest in Philadelphia-minted circulation strikes.

 

2017-D Dime Value

The 2017-D Roosevelt Dime was produced at the Denver Mint. Denver-minted dimes traditionally show consistent strike quality, though variations exist across the production run.

The “D” mint mark appears above the date on the obverse, a placement standard since 1968 when mint marks returned to Roosevelt dimes after their temporary removal.

The Full Bands designation remains the key value driver for 2017-D dimes in collector grades. Population data shows only 162 specimens have achieved MS67 with Full Bands, while MS66FB examples number 177. This limited population reflects the challenge of finding properly struck pieces among the massive production run.

Recent auction results demonstrate the market for these coins. An MS66FB example sold for $33 in October 2024, establishing a benchmark for high-grade Full Bands specimens. Lower grades with Full Bands typically trade in the single-digit dollar range.

The market activity chart shows steady engagement from collectors seeking Denver examples.

 

2017-S DCAM Dime Value

The Deep Cameo designation represents the premium standard for modern proof Roosevelt Dimes. This visual effect features frosted design elements contrasting sharply against mirror-like fields, creating a three-dimensional appearance that collectors prize. The 2017-S proof dimes with DCAM designation showcase these characteristics at their finest.

These coins were distributed exclusively in annual proof sets, sealed in protective capsules to preserve their pristine surfaces. The packaging prevents handling marks and maintains the mirror finish that defines proof quality. Collectors purchasing original sets received certificates of authenticity from the U.S. Mint.

Population data shows strong grading results for 2017-S DCAM dimes. With 494 specimens achieving PR70 and 315 grading PR69, the technical quality of these strikes demonstrates consistent manufacturing standards. A PR69DCAM example realized $45 at auction in September 2022, establishing market value for high-grade specimens.

Market trends indicate sustained demand for proof coins from the San Francisco Mint.

 

2017-S Silver DCAM Dime Value

The 2017-S Silver Roosevelt Dime represents a bridge between historic composition and modern minting excellence. Struck in 90% silver with 10% copper alloy, these coins carry the same precious metal content as circulating dimes from 1946 through 1964, weighing 2.50 grams compared to the lighter 2.27-gram copper-nickel proofs.

The silver proofs are distributed exclusively through the annual Silver Proof Set, separate from the standard clad proof offerings. Each set includes silver versions of the dime, quarter, and half dollar, packaged in protective capsules with certificates of authenticity. This dual-track approach allows the Mint to serve both budget-conscious collectors and those seeking precious metal holdings.

Market performance for 2017-S Silver DCAM specimens remains stable. A PR69DCAM example achieved $45 at auction in February 2023, demonstrating consistent demand among collectors who appreciate both the silver content and proof quality finish.

Market activity reflects ongoing collector participation driven by both numismatic and precious metal appeal.

Also Read: 16 Rare Dime Errors List with Pictures (By Year)

 

Rare 2017 Dime Error List

Most 2017 Roosevelt dimes hold face value, manufacturing anomalies during production create collectible specimens worth considerably more. Error coin values vary widely based on error type, visibility, and preservation condition, with market prices ranging from a few dollars to several hundred dollars for well-documented specimens.

1. Missing Clad Layer Errors

This error occurs when impurities or temperature fluctuations during planchet preparation cause weak bonding between the outer nickel layer and copper core, resulting in layer separation. The affected coin displays standard nickel cladding on one side while the opposite side reveals exposed copper beneath.

Market values typically range from $50 to $150 for specimens in uncirculated condition, with higher grades commanding premium prices. The dramatic visual contrast between nickel and copper surfaces makes these specimens readily identifiable to collectors.

2. Die Clash Errors

A die clash error occurs when the hammer and anvil die strike against each other without a planchet between them, resulting in the dies leaving impressions of their designs on each other. When subsequent planchets are struck, the transferred design appears distorted, displaying mixed elements from both sides.

A 2017-D MS63 dime with a die clash error on the obverse was auctioned for $120 at a 2019 auction. Coins showing clear ghosting of opposite-side design elements command higher premiums than subtle examples.

3. Rim Cud Errors

A rim cud error appears as a bump along the coin’s rim, caused by breakage along the die’s circumference. When die pieces break away, metal fills the resulting cavity, and this impression transfers to struck planchets as raised irregular areas.

A 2017-P Roosevelt dime graded MS65 was sold for $125 at an online auction in 2021. Larger, more prominent cud formations generally achieve higher valuations when condition factors remain comparable.

 

Where to Sell Your 2017 Dime?

Selecting the appropriate selling venue depends on your coin’s condition, rarity, and your timeline expectations. Professional grading and authentication through recognized services can increase buyer confidence and potentially command higher prices for premium specimens.

Whether choosing online marketplaces for convenience or established dealers for immediate transactions, understanding your coin’s true value beforehand ensures you receive fair compensation for your 2017 dime.

Check out now: Best Places To Sell Coins Online (Pros & Cons)

 

FAQ about The 2017 Dime

1. Do 2017 dimes contain silver?

Standard 2017 Roosevelt dimes are made of a clad composition that contains copper and nickel. The regular circulation strikes and standard proofs contain no precious metal content.

Silver proof dimes were also minted specifically for collectors. These special editions contain 90% silver and were sold exclusively in premium collector sets rather than released for circulation.

2. Is my 2017 dime worth more than face value?

Standard 2017 clad dimes in circulated condition are only worth their face value of $0.10. These coins only sell for a premium in uncirculated condition, with both 2017-P and 2017-D dimes worth around $1.50 in MS-65 grade.

Proof editions and high-grade specimens with Full Bands designation command higher premiums. Error coins can reach hundreds of dollars depending on the type and severity of the minting anomaly.

3. What is a Full Bands 2017 dime?

Full Bands Roosevelt dimes show complete horizontal lines on the bands across the torch on the reverse. Both silver and copper-nickel Full Bands specimens command premiums over similarly graded non-FB examples.

This designation requires sharp strike quality with unbroken band separation on both upper and lower torch sections. Professional grading services use “FB” (PCGS) or “FT” (NGC) designations to identify qualifying specimens.