2013 Dime Value Checker: Errors List, “P”, “D” & “S” Mint Mark Worth

2013 Dime value ranges from $0.10 face value to $336. That record was set by a Grade 68 example sold through Heritage Auctions in October 2020. If you’re curious what yours might fetch, upload a photo of your coin below for a quick value range. You can also scroll down to browse recent eBay sales and see what 2013 Dimes are going for today.

 

2013 Dime Value By Variety

This chart displays the estimated market values of 2013 Roosevelt dimes across various mint marks, special designations, and condition grades, helping collectors determine the worth of their coins.

If you know the grade of your coin, you can find the exact price below in the Value Guides section.

Also Read: Roosevelt Dime Value (1946-Present)

Top 10 Most Valuable 2013 Dime Worth Money

The auction data tells a clear story: condition is everything with modern coins like the 2013 dime.

The 2013-D and 2013-P at MS68 grade ($336 and $297 respectively) are dramatically more valuable because they sit above the population ceiling where most certified examples stop. Over a billion 2013 dimes were minted, but fewer than 0.1% survive in MS68 condition.

The value jump from MS67 to MS68 is especially striking. The 2013-P climbs from about $37 at MS67 to $297 at MS68 — a gain of over 700% for just one grade point.

That non-linear pattern is common in modern coins. There is a genuine rarity bottleneck between MS67 and MS68 because even tiny contact marks from the minting machines prevent most coins from reaching the top tier.

Silver proof and First Strike versions land in the $39–$104 range. These have genuine collector appeal, but pristine circulation strikes in the highest grades remain the top performers.

History Of The 2013 Dime

The Roosevelt dime was born from urgency. After President Franklin D. Roosevelt died on April 12, 1945, Treasury Secretary Henry Morgenthau Jr. quickly announced that a new Roosevelt dime would be designed and circulated before the year ended.

Chief Engraver John R. Sinnock had already sculpted a presidential medal of Roosevelt in 1941, so Mint Director Nellie Tayloe Ross tapped him for the job. Sinnock worked with Assistant Engraver Gilroy Roberts, submitting his first design on October 12, 1945 — only to have it rejected by the Commission of Fine Arts.

Ross was under intense time pressure. She needed the new coin ready for the March of Dimes fundraising campaign in January 1946, so she pushed through Sinnock’s revised third draft on January 8 — just weeks before the deadline.

The Philadelphia Mint struck the first Roosevelt dimes on January 19, 1946. They went into circulation on January 30 — what would have been Roosevelt’s 64th birthday.

The design immediately sparked two controversies. First, anti-Communist sentiment led to rumors that Sinnock’s “JS” initials on the coin’s obverse actually stood for Joseph Stalin, placed there by a Soviet agent inside the Mint. Second, African-American sculptor Selma Burke claimed Sinnock copied her 1944 bronze bas-relief portrait of Roosevelt; the Mint denied the allegation, but the debate continues among historians today.

The Coinage Act of 1965 removed silver from the dime’s composition entirely. The new copper-nickel clad formula was chosen partly because it matched the weight and electrical properties of silver dimes — critical for compatibility with the growing number of vending machines at the time.

By 2013, the Roosevelt dime had been in continuous production for 67 years — a record of design stability unmatched by any other U.S. circulating coin. The 2013 issue carried no commemorative changes or special design events.

That year, the U.S. economy was in a slow recovery from the 2008 financial crisis. GDP grew at 1.9%, unemployment fell from 7.9% to 7.0%, and the federal government briefly shut down in October — all normal context for a workhorse circulation coin showing up in pocket change every day.

Also Read: Top 100 Most Valuable Roosevelt Dimes Worth Money List

Is Your 2013 Dime Rare?

Want to know if your 2013 dime is a hidden treasure? Use our Coin Identifier and Value App to instantly check its rarity grade and current market value. Simply snap a photo and discover what your pocket change might really be worth!

Key Features Of The 2013 Dime

Understanding the design elements and physical characteristics of the 2013 dime is essential for collectors seeking to authenticate coins, assess condition, and identify valuable varieties or errors.

By examining the obverse, reverse, and technical specifications carefully, you can distinguish genuine pieces from counterfeits or damaged specimens — and spot the details that drive value.

The Obverse Of The 2013 Dime

The obverse features a left-facing profile of President Franklin D. Roosevelt, rendered in Chief Engraver John R. Sinnock’s clean, classical style. The word “LIBERTY” arcs along the upper rim, while “IN GOD WE TRUST” appears in smaller lettering below Roosevelt’s chin.

The date “2013” sits at the lower right, with Sinnock’s initials “JS” subtly placed just below the neckline. Since 1968, the mint mark has appeared on the obverse above the date — “P” for Philadelphia, “D” for Denver, and “S” for San Francisco proof strikes.

The Reverse Of The 2013 Dime

The reverse centers on a lit torch representing liberty, flanked by an olive branch (peace) on the left and an oak branch (strength and independence) on the right. This symbolic trio reflects the ideals that emerged from World War II’s end.

“E PLURIBUS UNUM” (out of many, one) stretches across the field above the torch. “UNITED STATES OF AMERICA” curves along the top rim, and “ONE DIME” appears along the bottom — identifying country and denomination clearly.

The torch area is especially important for collectors. The horizontal bands across the top and bottom of the torch must show complete, unbroken separation to qualify for the Full Bands (FB) designation — the single most important strike-quality factor affecting 2013 dime value. Keep reading for a full explanation of what Full Bands means and why it matters so much.

Other Features Of The 2013 Dime

The 2013 dime measures 17.90 millimeters in diameter and weighs 2.27 grams, making it the smallest and thinnest U.S. coin in current circulation. It has a reeded edge containing 118 individual reeds — a security feature that prevents counterfeiting and coin clipping.

The coin’s copper-nickel clad composition (75% copper, 25% nickel over a pure copper core) gives it a silver-gray appearance, distinctly different from the brighter silver-white look of pre-1965 silver dimes. The silver proof version weighs slightly more at 2.50 grams, which is one quick way to tell the two apart.

These specifications have remained identical for all modern Roosevelt dimes since the 1965 composition change.

Also Read: Top 100 Rarest Dimes Worth Money (Most Expensive)

2013 Dime Mintage & Survival Data

The scale difference across 2013 mints is enormous. Philadelphia struck over 1.08 billion pieces. Denver produced over 1.02 billion. Together, these two circulation mints contributed more than 2.1 billion dimes to everyday commerce in 2013 alone.

San Francisco proof versions totaled roughly 1.32 million pieces across both clad and silver varieties — less than 0.1% of the total production. The clad proof had 854,785 struck; the silver proof came in at approximately 467,691.

Survival rates for top-grade examples are genuinely low despite the huge mintage numbers. Coins that spent time in circulation picked up wear, scratches, and bag marks almost immediately. Even uncirculated rolls from 2013 often contain only MS64 or MS65 coins, because dimes touch each other and the coin bag during storage and transport.

The result: an MS68 2013 dime is genuinely rare in practice, even though over a billion were made. Fewer than 10–15 examples of the 2013-P or 2013-D in MS68 are known to exist in certified holders across PCGS and NGC combined.

Also Read: Top 70+ Most Valuable Mercury Dimes Worth Money (Chart By Year)

The Easy Way to Know Your 2013 Dime Value

Working out what your 2013 dime is actually worth can feel overwhelming. You’re trying to read tiny mint marks, judge whether the torch bands are fully separated, spot possible errors, and then cross-reference everything with current market prices.

One small detail — like whether your coin grades MS67 or MS68 — can represent a several-hundred-dollar difference in value.

That’s where Coin Identifier and Value App comes in. Just snap a photo of your coin, and the app instantly identifies the variety, assesses the condition, and gives you an accurate current market value — all in seconds.

No magnifying glass required and no endless research — just clear answers when you need them. Whether you have a common pocket-change piece or a high-grade Full Bands specimen worth serious money, you’ll know exactly what you’re holding.

2013 Dime Value Guides

The 2013 Roosevelt dime series has four distinct varieties. Each serves a different purpose in the collector marketplace, from everyday circulation to premium proof sets.

The key distinction is between circulation strikes and proof strikes. Philadelphia and Denver produced billions of coins for daily commerce. San Francisco focused exclusively on collector-oriented proof specimens with mirror-like fields and frosted devices.

Within the proof category, there is a further split: standard copper-nickel clad proofs and special 90% silver editions. The silver version carries intrinsic precious metal value on top of its numismatic appeal.

2013 Dime Types:

• 2013-P Dime – Philadelphia circulation strike
• 2013-D Dime – Denver circulation strike
• 2013-S DCAM Dime – San Francisco proof (copper-nickel clad)
• 2013-S Silver DCAM Dime – San Francisco silver proof (90% silver)

2013-P Dime Value

The 2013-P dime is one of the most abundant modern Roosevelt dimes in existence, with over 1.086 billion struck at Philadelphia. Circulated pieces are worth face value, and basic uncirculated coins at MS65 trade for around $1.50 to $2.50.

Value climbs significantly only at the top of the grading scale. The finest known MS68 specimen sold for $297 at a Heritage auction in December 2018. For comparison, a 2013-P MS66 Full Bands sold for $600 at Heritage in 2018 — showing how the FB designation can push prices beyond what raw grade alone would suggest.

At MS67 without Full Bands, the coin trades for just a few dollars. That price jumps to around $37 for an MS67 FB example. The pattern shows clearly: strike quality matters as much as grade when evaluating these coins.

Recent market activity shows steady collector interest in premium examples, though transaction volume remains modest compared to earlier Roosevelt dime dates.

2013-D Dime Value

The Denver Mint produced over 1.025 billion 2013-D dimes, making it the highest-mintage variety of the 2013 series. Like the Philadelphia issue, most circulated examples are worth only face value.

The Full Bands population data reveals a harsh truth about this coin. There are 197 certified MS67 FB examples, yet the guide price is only $30 — barely above the cost of grading. There is only one known MS67+ FB in the world, and it prices at just $60.

Only at MS68 FB does the price jump to meaningful territory. There are roughly 10 certified examples, with a guide price of $425. Real-world results, though, have come in lower: at a Heritage auction in October 2020, one MS68 FB sold for $336 — about $89 below guide price.

That gap between guide price and realized price reflects the limited collector enthusiasm for high-mintage modern coins in copper-nickel. Many serious collectors would rather spend $300 on a 1950s silver Full Bands dime than on a clad coin from 2013.

2013-S DCAM Dime Value

The 2013-S Deep Cameo (DCAM) proof dime had a mintage of 854,785 pieces. Deep Cameo — DCAM — means the coin’s raised design elements (called “devices”) appear heavily frosted white while the flat background fields show a deep mirror-like reflection. That sharp black-and-white contrast is the hallmark of a premium proof coin.

Despite being purpose-made for collectors, the 2013-S DCAM struggles in the market. Regular examples price at around 50 cents, and high-grade pieces reach roughly $4.

In October 2021, an online auction sold one PR70 DCAM — the highest possible proof grade — for only $35. A PR70 DCAM is considered a perfect coin: deeply mirrored fields, heavily frosted devices, and no flaws of any kind. Yet $35 is barely more than a roll of circulated dimes.

The reason is simple: the market already has over 800,000 of these coins, many in near-perfect condition because they were stored carefully as soon as collectors received them from the Mint. There is no scarcity to drive up prices.

2013-S Silver DCAM Dime Value

The 2013-S silver proof dime had a mintage of approximately 467,691 — significantly fewer than the 854,785 clad proofs struck the same year. Its 90% silver composition gives it a weight of 2.50 grams vs. the 2.27 grams of a clad dime, and a silver melt value around $2.68 at typical silver prices.

That intrinsic silver floor is what keeps the coin relevant even when numismatic demand is soft. Population data shows PR69 with 1,055 certified examples and PR70 with approximately 1,205 — meaning most submitted coins can achieve near-perfect grades, which limits the premium at the top.

The current guide price for a PR70 DCAM is around $25. In March 2022, one PR70 DCAM sold for $54 at an online auction — a premium driven mostly by rising silver prices rather than collector demand. Historical auction records from 2013–2014 showed PR70 prices fluctuating between $15 and $27, with buyers focused on the silver content and the set’s identity as precious metal collectibles.

Also Read: 16 Rare Dime Errors List with Pictures (By Year)

Rare 2013 Dime Error List

Despite over 2 billion minted, 2013 Roosevelt dimes occasionally show production errors that transform ordinary pocket change into collector prizes. These mistakes happen when dies malfunction, foreign materials interfere with the strike, or planchets are misaligned or incorrectly prepared. Error coins range from subtle die chips to dramatic off-center strikes, and values vary widely based on error type, visibility, and condition.

1. Die Chip Error

A die chip happens when a small piece breaks off the face of a striking die. The damaged hollow fills with metal over subsequent strikes, and that metal-filled void leaves a raised, formless bump on the finished coin’s surface.

Die chips are relatively common among Roosevelt dimes. Most are small and subtle, easily missed without magnification.

Value depends on the chip’s size and placement. A dramatic chip on a prominent design element commands far more than a tiny mark near the rim. In 2014, Heritage Auctions sold a 2013-P MS65 dime with a reverse die chip for $200 — clear proof that eye-catching examples attract real collector money.

2. Struck-Through Grease Error

This error occurs when grease accumulates on the die face during production. The grease layer blocks proper metal flow, leaving portions of the design appearing weak, faded, or completely missing in the affected area.

The torch bands and Roosevelt’s portrait are the details most likely to show grease-related weakness — which makes these errors especially relevant for Full Bands collectors. Heavy grease errors can eliminate the bands entirely, turning what might have been an FB coin into a plain one.

In 2015, Heritage Auctions sold a 2013-D MS62 grease struck-through error for $420. Strong collector demand exists for examples where significant design sections are visibly lost.

3. Partial Collar Error

Partial collar errors happen when a planchet is not fully seated inside the retaining collar during striking. The collar defines the coin’s circular shape and edge reeding. Without full contact, one side of the planchet expands beyond its normal boundary while the other side retains standard dimensions.

The result is a distinctive asymmetrical shape — one edge shows normal reeding while the opposite side appears flattened or curved, creating what collectors call a “railroad rim” effect when viewed from the side.

GreatCollections auctioned a 2013-D MS60 partial collar error for $250. The dramatic, immediately visible appearance makes this type popular with error specialists even at lower technical grades.

4. Off-Center Strike Error

An off-center strike occurs when the planchet is not properly positioned under the dies at the moment of striking. The design lands offset from the coin’s center, leaving a blank crescent of unstruck metal on one side.

Value scales with the degree of offset. A 5% off-center strike adds only a modest premium. A 50% off-center strike — where the design is half gone but the date is still visible — is highly desirable and can bring $75 to $150 or more for a well-struck example.

Off-center 2013 dimes occasionally surface in circulation because they are thin enough to slip through standard sorting and inspection systems at the Mint.

5. Missing Clad Layer Error

The 2013 dime’s copper-nickel clad construction involves three bonded layers: a pure copper core sandwiched between two cupronickel outer layers. Occasionally, one of those outer layers fails to bond properly before the planchet is punched out.

When a clad layer is missing on the obverse or reverse, that side of the coin shows the reddish-brown copper core instead of the standard silver-gray surface. The contrast is immediately obvious and makes these errors easy to authenticate.

Missing clad layer errors for modern Roosevelt dimes typically trade in the $75–$150 range depending on condition and which side is affected. Examples with missing clad layers on the obverse (Roosevelt’s portrait side) often attract more collector interest than reverse-side examples.

Where To Sell Your 2013 Dime?

Wondering where to sell your 2013 Dime for the best price? I’ve researched the top online marketplaces and broken down each platform’s strengths and weaknesses to help you choose.

Check out now: Best Places To Sell Coins Online (Pros & Cons)

FAQ About The 2013 Dime

1. Are 2013 dimes worth anything?

Most circulated 2013 dimes are worth only their 10-cent face value due to a mintage of over 2 billion pieces combined from Philadelphia and Denver. However, certain versions command real premiums.

Uncirculated examples at MS65 sell for around $1.50–$2.50. High-grade Full Bands coins — showing complete separation of the torch’s horizontal bands — reach $30–$425 depending on grade. The 2013-S silver proof contains 90% silver with a melt value near $2.68, and top PR70 examples have sold for up to $54 at auction. Dramatic error coins like grease struck-through examples can bring $200–$420.

2. How can I tell if my 2013 dime is valuable?

Start by checking the mint mark above the date on the obverse. “P” means Philadelphia, “D” means Denver, and “S” means a San Francisco proof coin.

Next, examine the torch on the reverse under magnification. If the horizontal bands at the top and bottom of the torch show clear, unbroken separation with no metal bridging between them, the coin may qualify for the Full Bands (FB) or Full Torch (FT) designation — a major value driver. Then look for errors like off-center designs, raised bumps, missing details, or asymmetrical shapes. Finally, check the weight: a silver proof version weighs 2.50 grams versus 2.27 grams for a standard clad dime.

3. What is the difference between Full Bands (FB) and Full Torch (FT)?

Both designations describe exceptional strike quality on Roosevelt dimes, but they come from different grading services and use different standards.

PCGS (Professional Coin Grading Service) awards the “Full Bands” (FB) designation when the upper and lower horizontal bands on the reverse torch show complete, unbroken separation. NGC (Numismatic Guaranty Corporation) uses the stricter “Full Torch” (FT) standard, which requires band separation plus defined vertical lines along the torch body. Because the NGC standard is harder to meet, a coin may earn FB from PCGS but not FT from NGC. This is worth knowing when comparing prices across the two services.

4. What makes the 2013-S silver proof dime different from the clad proof?

The 2013-S silver proof is composed of 90% silver and 10% copper, while the standard clad proof uses copper-nickel over a copper core. The silver version weighs 2.50 grams versus 2.27 grams — a quick way to tell them apart on a precise scale.

The silver proof also had a lower mintage: approximately 467,691 struck versus 854,785 for the clad version. Its silver content gives it an intrinsic melt value floor of around $2.68 even in heavily worn condition, something the clad proof completely lacks. PR70 silver proofs have sold for up to $54 at auction, while equivalent clad proofs top out around $35.

5. Why did the “JS” initials on the Roosevelt dime cause controversy?

When the Roosevelt dime was released in January 1946, strong anti-Communist sentiment in the United States fueled a rumor that the “JS” initials stood for Joseph Stalin, placed there by a Soviet agent inside the Mint. The initials actually belong to Chief Engraver John R. Sinnock, who had been in his position since 1925 and designed the coin at the request of Mint Director Nellie Tayloe Ross. A second controversy accused Sinnock of copying sculptor Selma Burke’s 1944 bronze bas-relief portrait of Roosevelt for the dime’s obverse design; the Mint denied this allegation.

6. Should I get my 2013 dime professionally graded?

Professional grading through PCGS or NGC costs $100–$150 or more per coin once you factor in membership fees, handling, and shipping. That cost only makes sense if your coin has real value potential.

For a 2013 dime, grading is worth considering if the coin appears to be MS67 or above, shows a Full Bands strike, or displays a dramatic error like a significant off-center or missing clad layer. A good rule of thumb: the coin’s estimated value should exceed grading costs by at least three to five times. Circulated 2013 dimes worth only face value should never be submitted for grading.

7. What 2013 dime errors are most valuable?

The most valuable 2013 dime errors are typically struck-through grease errors with significant design loss and dramatic off-center strikes where the date is still visible.

In documented auction sales, a 2013-D MS62 grease struck-through error sold for $420 at Heritage Auctions in 2015, and a 2013-P MS65 die chip error sold for $200 at Heritage in 2014. A 2013-D MS60 partial collar error brought $250 at GreatCollections. Missing clad layer errors and larger off-center strikes also attract strong collector interest, typically in the $75–$200 range.

8. How do 2013 dime values compare to earlier silver Roosevelt dimes?

The comparison is not flattering to 2013 issues. Most serious collectors prefer to put the same money — $300 to $425 — toward a 1950s or 1960s silver Roosevelt dime in Full Bands condition rather than a modern copper-nickel coin.

Silver Roosevelt dimes carry precious metal content that gives them a permanent floor value regardless of collector demand. The 1949-S (with only 13.5 million struck) remains the series’ true key date and commands thousands of dollars in high Mint State grades. The 2013 dime’s appeal is almost entirely conditional on exceptional grade or dramatic errors — it has no silver content and no scarcity at the mid-grade level.

9. Is the 2013 dime design still being used today?

Yes, as of 2025 the Roosevelt dime still uses John R. Sinnock’s original 1946 design — making it the only U.S. circulating coin to remain essentially unchanged for nearly 80 years. However, a redesign called the “Emerging Liberty” design was being discussed for a future issue around the 2026 Semiquincentennial celebration of American independence. Collectors watching the series should note that any final-year dime with Sinnock’s original design could attract historical significance once a new design launches.

10. What is the rarest Roosevelt dime ever made?

The 1975 No-S proof Roosevelt dime is the rarest in the entire series, with only two known examples. One PCGS-certified example sold for $349,600 at auction. Other exceptionally valuable proof varieties include the 1968 No-S and 1983 No-S proofs, both worth thousands of dollars.

Among business-strike circulation coins, the 1996-W West Point dime — issued only in 1996 Uncirculated Sets with a mintage of 1,457,000 — is the lowest-mintage business-strike Roosevelt dime and one of the most popular modern date rarities. The 2013 dime is not in the same rarity category as these coins, but top-grade examples with Full Bands designation remain genuinely difficult to find.