2011 Dime Coin Value: Errors List, “D”, “S” & “P” Mint Mark Worth

2011 Dime value ranges from $0.10 face value to $1,299. That record goes to a 2011-P Dime graded 68, sold through Heritage Auctions in July 2018. Upload a photo of your coin below to see what yours could be worth. Then scroll down to check recent eBay sales and get a clear picture of what collectors are paying right now.

 

2011 Dime Value By Variety

Here’s a quick breakdown of 2011 dime values across grades and mint marks, including Philadelphia (P), Denver (D), and San Francisco (S) proofs.

If you know the grade of your coin, you can find the exact price below in the Value Guides section.

Also Read: Roosevelt Dime Value (1946-Present)

Top 10 Most Valuable 2011 Dime Worth Money

The top spot belongs to a 2011-P MS68 Full Bands dime that hammered at $1,299. Right behind it, a 2011-D MS68 FB brought $995. Both sales happened at Heritage Auctions in July 2018. That’s serious money for coins pulled from rolls struck by the hundreds of millions.

The huge gap between MS67 and MS68 prices tells the whole story. At the very top of the grading scale, each single point jump can multiply value tenfold. That’s the condition census effect in action — there just aren’t many survivors in those top-pop grades.

Full Bands (FB) is the designation PCGS and NGC award when both horizontal band pairs on the reverse torch show complete, unbroken separation. Fewer than 5% of modern Roosevelt dimes earn it. Pair that with MS68 preservation on a business strike, and you’ve got a coin that needed everything to go right — perfect strike force, clean dies, and zero contact from that moment forward.

Proof coins tell a different story. The 2011-S PR70 at $198 is impressive but far more modest. Proofs get special handling from the moment they’re struck, so top grades are much more achievable. Business strikes have to survive bins, counting machines, and bag marks — which is exactly why the MS68 FB coins command 40–100 times what a standard MS65 brings.

History of the 2011 Dime

Dime production jumped 34.2% in 2011 compared to the year before. That kind of surge tells you something about the economy bouncing back.

Rewind to 2009. The financial crisis hit so hard that total U.S. Mint output dropped to just 3.548 billion coins. The Mint actually stopped making nickels and dimes for most of that year — almost unheard of. By 2011, output climbed past 8.2 billion coins, a 28.7% increase over 2010. Jefferson nickels led the charge with a 101.9% production spike, and Roosevelt dimes weren’t far behind. Almost 383 million more dimes rolled off the presses in 2011 than in 2010. Combined Philadelphia and Denver production topped 1.5 billion dimes, a genuine return to pre-recession levels.

The 2011 Mint Set (PD) included coins from both facilities alongside five America the Beautiful quarters — Gettysburg National Military Park, Glacier National Park, Olympic National Park, Vicksburg National Military Park, and Chickasaw National Recreation Area. The dime design itself stayed the same: John R. Sinnock’s 1946 portrait, now 65 years running.

Fun detail: 2011 marked the 65th anniversary of the Roosevelt dime. The design debuted just months after FDR’s death in April 1945. His connection to the March of Dimes made the denomination a natural fit for the tribute.

Also Read: Top 100 Most Valuable Roosevelt Dimes Worth Money List

Is Your 2011 Dime Rare?

Here’s what trips people up: a coin with 748 million struck can still be genuinely rare. It depends entirely on grade. Below MS66, your 2011 dime is one of millions. At MS68 Full Bands, it’s one of a handful. The rarity rankings shift dramatically once you cross into top-pop territory, and that’s where the money is. Silver proofs rank differently too — lower mintage but higher survival rates, so the rarity curve looks nothing like the business strikes.

Looking at these Roosevelt dimes, rarity rankings can make a huge difference in value — check Coin Identifier and Value App to instantly see where your coins rank and what they’re actually worth!

Key Features of the 2011 Dime

The 2011 Dime continues the Roosevelt dime series honoring the 32nd President of the United States, Franklin D. Roosevelt.

Business strikes came from Philadelphia (“P”) and Denver (“D”). San Francisco (“S”) handled the proof versions — both standard clad and special 90% silver editions.

The Obverse of the 2011 Dime

You’ll see Roosevelt’s left-facing portrait front and center. “LIBERTY” runs along the rim, with “IN GOD WE TRUST” tucked below his profile.

The date “2011” sits on the lower portion. Look just above it for the mint mark on circulation strikes.

Designer John R. Sinnock’s initials “JS” appear at the truncation of Roosevelt’s neck. Sinnock was the Mint’s Chief Engraver and created this portrait shortly before his death in 1947.

The Reverse of the 2011 Dime

Flip it over and you’ll find a flaming torch at the center — that’s the liberty torch. An olive branch (peace) extends from the left, and an oak branch (strength) from the right.

“E PLURIBUS UNUM” arcs across the top. “UNITED STATES OF AMERICA” runs along the outer rim, with “ONE DIME” at the bottom.

The torch is where you want to focus for the Full Bands call. Look at the horizontal bands wrapping around the torch. If you can see complete, unbroken separation between the upper and lower band pairs, your coin may qualify for the FB premium.

Other Features of the 2011 Dime

Standard clad construction: outer layers of 75% copper / 25% nickel bonded to a pure copper core. Total weight is 2.268 grams, diameter 17.91 millimeters, thickness 1.52 millimeters. The edge is reeded — those small ridges you can feel with your fingernail.

Silver proof versions weigh slightly more at 2.5 grams thanks to their 90% silver composition. You can spot one by the absence of that copper-colored stripe on the edge.

Also Read: Top 100 Rarest Dimes Worth Money (Most Expensive)

The Easy Way to Know Your 2011 Dime Value

Three things drive your 2011 dime’s value: mint mark, grade, and any errors or special features.

Start on the obverse, right above the date. You’re looking for “P” (Philadelphia), “D” (Denver), or “S” (San Francisco proofs). San Francisco made only collector proofs — clad and 90% silver editions.

Grade matters most. The Sheldon scale runs from 1 to 70, and it’s been the standard since Dr. William Herbert Sheldon introduced it in 1949. On Roosevelt dimes, check the hair detail above Roosevelt’s ear for wear. Then flip it over and examine the torch flame.

Pay close attention to the torch bands. Coins showing complete separation of both horizontal band pairs earn the Full Bands (FB) designation, and that’s where premiums get serious. PCGS defines it as “full separation of the upper and lower horizontal bands of the torch on the reverse” with no major cuts, marks, or breaks interrupting the separation.

Errors can change everything. Off-center strikes, doubled dies (DDO/DDR), broad strikes, rim cuds, struck-throughs, and wrong planchet errors all carry premiums. How much depends on the coin’s grade, the size of the error, and how dramatic it looks.

Instead of navigating complex grading standards and price guides alone, the Coin Identifier and Value App instantly analyzes your 2011 dime’s mint mark, grade, and potential errors — giving you professional-level insights with just a quick photo!

2011 Dime Value Guides

• 2011-P Dime (Philadelphia)
• 2011-D Dime (Denver)
• 2011-S Proof DCAM Dime (San Francisco)
• 2011-S Silver Proof DCAM Dime

Four varieties across three mints. Philadelphia and Denver handled the business strikes — over 1.5 billion coins combined. San Francisco made clad proofs and 90% silver proofs in much smaller numbers for collectors.

Also Read: Top 70+ Most Valuable Mercury Dimes Worth Money (Chart By Year)

2011-P Dime Value

748 million struck. You could fill a swimming pool with these things. Finding one in your pocket change is effortless, and even uncirculated examples pop up now and then.

The real challenge starts higher up the grading scale. MS66 examples run about $3. At MS67, you’re looking at roughly $13. That’s where PCGS standards demand above-average strike, full mint luster, and very few tiny contact marks — a tough combination on coins that went through high-speed production.

Now here’s where it gets interesting. A 2011-P MS68 Full Bands specimen sold for $1,299 at auction. From 748 million coins to a $1,299 price tag — that’s conditional rarity at its finest. The FB designation requires complete, uninterrupted separation of both horizontal torch band pairs. Fewer than you’d think make the cut.

For context, a 1946 inaugural Roosevelt dime in MS68 FB brought $13,200 back in 2018. That shows you the ceiling this series can reach. The 2011-P is everywhere in typical grades but a completely different kind of rare when you’re chasing top-pop specimens.

The auction record chart below shows how certified examples have performed across grade levels.

Current market activity reflects ongoing interest from both type set collectors seeking representative examples and specialists pursuing condition rarities within the modern Roosevelt series.

Market activity score: 37/100 as of Sep 2026 — up 2 points from Jun 2026. 12-month peak: 40 (Jul 2026).

2011-D Dime Value

Did you know the Denver issue actually edged out Philadelphia? 754 million versus 748 million. Not that it matters much at lower grades — both are equally common in circulated and typical uncirculated condition.

Values start getting your attention around MS66, where examples trade for $4–$7. MS67 brings roughly $15–$31 depending on the specific coin. But MS68 is where things get wild. As PCGS CoinFacts puts it, these are “almost impossible to find” raw. If you want one, you’re better off buying it already slabbed.

The auction record sits at $995 for a 2011-D MS68 FB specimen sold at Heritage Auctions in July 2018. I think that price perfectly captures what conditional rarity means — a coin struck by the hundreds of millions that barely exists in top condition.

Registry set builders take note: Full Bands adds a real premium at every grade level on 2011-D dimes. That FB designation doesn’t just mean the coin survived well. It means the strike itself was exceptional — superior die force and alignment from the very first moment.

The auction record chart below shows the value trajectory for 2011-D dimes across grades and designations.

Market activity data reflects consistent demand from specialists building high-grade registry sets and collectors seeking properly struck modern examples.

Market activity score: 37/100 as of Sep 2026 — up 2 points from Jun 2026. 12-month peak: 40 (Jul 2026).

2011-S Proof DCAM Dime Value

If you’ve never held a Deep Cameo proof in person, you’re missing out. San Francisco struck 1,098,835 of these clad proof dimes in 2011, and the contrast is stunning — deeply mirrored fields against heavily frosted raised devices. The design practically jumps off the coin.

These came in the 2011 Proof Set, which went on sale January 11, 2011 at $31.95. Each set packed 14 coins from cents through Presidential dollars.

Survival rates are high since collectors tucked these away in original packaging from day one. Greysheet CPG values for 2025 fall between $2.70 and $25.00 depending on grade. The auction record is $198 for a PR70 specimen sold in July 2012 — a perfect coin with zero imperfections under magnification. Some collectors also chase “First Strike” labels from PCGS, awarded to coins submitted within 30 days of release, which adds a small pedigree premium.

We think modern clad proofs like the 2011-S are one of the best entry points for new collectors. Gorgeous coins with dramatic visual appeal at very accessible prices.

The auction record chart below tracks certified examples across grade levels.

Market activity demonstrates steady interest from proof set collectors and those assembling complete date runs of modern Roosevelt proofs with Deep Cameo designations.

Market activity score: 50/100 as of Sep 2026 — unchanged since Jun 2026. Currently at its 12-month peak.

2011-S Silver Proof DCAM Dime Value

Only 574,175 silver proof sets were produced — roughly half the clad proof run. That lower mintage matters. The original issue price was $67.95 for a 14-coin set, with the dime, Kennedy half, and all five America the Beautiful quarters struck in 90% silver.

Here’s something you should know: this dime weighs 2.5 grams and contains approximately 0.0723 troy ounces of pure silver. At current silver prices, melt value alone can top $6.50. That’s a meaningful floor the clad version simply doesn’t have.

The auction record is $203 for a PR69 Deep Cameo example sold in May 2020. That beats the clad PR70 record of $198, which tells you the silver content and lower mintage carry real weight with collectors. The 90% silver proof program restarted in 1992 and has built a dedicated following ever since.

For collectors who want both numismatic quality and precious metal content in one coin, the 2011-S Silver Proof is hard to beat.

The auction chart below shows pricing across certified grade levels for these silver proofs.

Market activity reflects interest from both Roosevelt dime specialists and collectors building comprehensive silver proof date runs spanning the modern era.

Market activity score: 37/100 as of Sep 2026 — up 2 points from Jun 2026. 12-month peak: 47 (Jul 2026).

Also Read: 16 Rare Dime Errors List with Pictures (By Year)

Rare 2011 Dime Error List Worth Money

Over 1.5 billion 2011 dimes were struck. With that kind of volume, mistakes happen. Some slipped past quality control and into circulation, and those errors can turn a ten-cent coin into a four-figure collectible. Here’s what to look for.

1. 2011 Off-Center Strike Error

The planchet and die weren’t lined up properly, so part of the design got pushed off the edge. More displacement means more value — but only if the date is still visible. That’s the key when cherrypicking these.

A 2011-D Roosevelt dime graded MS65 with an off-center error sold for $985 at Heritage Auctions in 2013. Expect $50–$150 for 20–30% off-center examples. Dramatic 40–50% strikes can bring $300–$1,000 depending on grade.

2. 2011 Broad Strike Error

When the collar die is missing or out of position, the planchet spreads outward during striking. You get an oversized coin with a smooth, unreeded edge — but the full design on both sides. These are visually dramatic and easy to spot.

A 2011-P Roosevelt dime graded MS63 with a broad strike error sold for $1,020 at a Great Collections auction in 2015. Most uncirculated broad strikes trade in the $150–$400 range.

3. 2011 Wrong Planchet Error

This is the holy grail of modern dime errors. A dime die accidentally strikes a planchet meant for a different denomination — usually a Jefferson nickel blank. The coin shows Roosevelt’s portrait but has the wrong size and weight. Impossible to miss once you know what you’re holding.

A 2011-D dime graded MS61 struck on a Jefferson nickel planchet was auctioned for $1,230 at Heritage Auctions in 2020. Always get suspected wrong planchet errors authenticated by PCGS or NGC before selling.

4. 2011 Doubled Die Obverse (DDO) Error

DDO errors happen during die manufacturing, not during striking. The hub impresses the design onto the die at slightly different angles across multiple passes. Every coin from that die shows identical doubling. On 2011 dimes, look for it on Roosevelt’s facial features, “LIBERTY,” “IN GOD WE TRUST,” or the date.

Heritage Auctions sold a 2011-P dime graded MS60 with a doubled die error for $565 in 2021. Typical DDO examples range from $100–$600. Stronger, more obvious doubling always brings more money.

5. 2011 Struck Through Error

Something got between the die and the planchet — a wire strand, grease, cloth fiber, even another coin fragment. The foreign object leaves an impression or blank spot on the finished coin. “Retained” struck-throughs, where the object stays embedded, are the most desirable.

In 2014, a collector paid $730 for a 2011-P struck-through dime graded MS63. Grease-filled strikes are more common and worth less. Wire or object retained examples command the real premiums.

6. 2011 Rim Cud Error

A chunk breaks off the edge of the die. On subsequent strikes, metal flows into that void and creates a raised, featureless blob along the rim. Bigger cuds bring bigger prices. Simple as that.

A 2011-D Roosevelt dime graded MS60 with a large rim cud error sold for $350 at a Heritage Auctions sale in 2017. Value depends on size, location, and overall coin condition.

7. 2011 Die Chip Error

Think of a die chip as a cud’s little brother. A tiny piece breaks off the die face instead of the rim, leaving a small raised bump on the coin’s surface. Most are minor. But location is everything.

In 2022, a collector on eBay paid $645 for a 2011-P Roosevelt dime graded MS60 with a die chip right on Roosevelt’s eye — giving him an enlarged-eyeball look. That kind of visual quirk is exactly what error collectors love. It proves that where the error lands matters as much as the error itself.

8. 2011 Misaligned Die Error

One die sits off-center relative to the other. Both sides show the complete design, but one face looks shifted or tilted compared to the other. It’s subtle but noticeable once you know what to look for.

A 2011-D Roosevelt dime graded MS65 with a misaligned die error has sold for collector premiums at auction. Values typically range from $50–$200 depending on how severe the misalignment is and the coin’s grade.

9. 2011 Improper Annealing Error

Before striking, planchet blanks get heated and cooled to achieve the right hardness. When that process goes wrong — too hot, too cool, uneven temperatures — you get weird surface colors. Grey, black, purple, orange, rainbow toning, splotchy patches. These coins look nothing like a normal dime.

A 2011-D Roosevelt dime graded MS64 with an improper annealing planchet error has sold for collector premiums. They’re eye-catching additions to any error collection.

Where to Sell Your 2011 Dime

For truly exceptional pieces — such as high-grade Full Bands specimens or significant errors — consider major numismatic auctions where competitive bidding can maximize your 2011 dime’s value. Heritage Auctions and Great Collections are two of the most active venues for certified modern Roosevelt dimes.

Check out now: Best Places To Sell Coins Online (Pros & Cons)

FAQ About the 2011 Dime Value

1. What does “Full Bands” mean on a 2011 Dime Value coin?

Full Bands (FB) means the upper and lower horizontal bands on the reverse torch show complete, uninterrupted separation. PCGS requires “full separation of the upper and lower horizontal bands of the torch with no major cuts, marks, or breaks.” The premium is huge — a 2011-P MS68 FB sold for $1,299, while a non-FB example at the same grade brings a fraction of that.

2. What makes a 2011 Dime value higher than face value?

Exceptional preservation (MS67+ grades), the Full Bands designation, or minting errors like wrong planchet strikes, broad strikes, off-center errors, and doubled dies. San Francisco Deep Cameo proofs also carry premiums thanks to limited mintage and pristine surfaces.

3. What is the composition of 2011 Dimes?

Circulation strikes use copper-nickel clad construction — outer layers of 75% copper and 25% nickel bonded to a pure copper core — weighing 2.268 grams. Silver proofs from San Francisco contain 90% silver and 10% copper, weighing 2.5 grams and containing approximately 0.0723 troy ounces of pure silver. You can spot a silver proof by its weight, its ring when dropped, and the lack of a copper-colored edge stripe.

4. What’s the difference between the clad and silver 2011 Proof Dimes?

The clad proof (mintage 1,098,835) came in the standard 2011 Proof Set at $31.95 with no meaningful precious metal content. The silver proof (mintage 574,175) came in the 2011 Silver Proof Set at $67.95 and contains actual 90% silver, giving it real bullion value. Lower mintage plus higher metal content equals more value — the PR69 DCAM auction record is $203 versus $198 for the clad PR70.

5. How can I tell a 2011-P from a 2011-D Dime?

Check the obverse directly above the date. “P” means Philadelphia (748 million struck). “D” means Denver (754 million struck). Both are business strikes with similar values, but series specialists collect them separately. San Francisco “S” coins are proof-only — you won’t find them in pocket change.

6. How much is a 2011 Dime worth in circulated condition?

Ten cents. Neither the P nor D is a scarce date, and any wear kills the premium. Value only kicks in at uncirculated grades, starting around $1–$2 at MS65 and climbing steeply from MS67 up. Full Bands doesn’t apply to circulated coins either — that’s an MS60+ designation only.

7. What 2011 Dime error is worth the most money?

The wrong planchet error takes the crown — a 2011-D dime struck on a Jefferson nickel planchet sold for $1,230 at Heritage Auctions in 2020. The 2011-P broad strike error hit $1,020 at Great Collections in 2015. Get any extreme error authenticated by PCGS or NGC before selling.

8. Is a 2011 Dime worth sending to PCGS or NGC for grading?

For common circulated or typical uncirculated examples, grading fees will eat up more than the coin is worth. It makes sense when your coin looks like MS67+ material, shows Full Bands potential, or has a notable error. Minimum submission fees at PCGS and NGC generally start around $30–$50 per coin, so make sure the potential value justifies the cost.

9. Did the U.S. Mint stop producing dimes in any recent year near 2011?

Yes. In 2009, the Mint stopped making both nickels and dimes for most of the year as the financial crisis crushed coin demand. Total output dropped to just 3.548 billion coins in 2009, compared to over 8.2 billion in 2011. That makes the 2011 production surge a real marker of economic recovery.

10. What is the 2011 Dime Value in perfect proof condition?

The highest confirmed result for the 2011-S clad Proof DCAM is $198 for a PR70 sold in July 2012. For the silver proof, a PR69 Deep Cameo brought $203 in May 2020. PR70 means absolutely perfect under magnification — very few proofs achieve it, which is why they command premiums over PR69 and PR68 examples.