2010 Quarter Value Checker: Errors List, “D”, “S” & “P” Mint Mark Worth

2010-D Yellowstone Quarter value ranges from $0.25 face value to $1,500. That record sale was a Grade 67 example sold through eBay Auctions in May 2021. Upload a photo of yours below and we’ll give you a quick value range based on your coin’s condition. You can also scroll down to check recent eBay sales to see what buyers are paying today.

 

2010 Quarter Value By Variety

Every 2010 quarter was struck at multiple facilities with different finishes. Check the chart below for current values across all varieties. If you already know your coin’s grade, jump to the Value Guides section for exact pricing.

Also Read: America The Beautiful Quarters Value (2010-2021)

Top 10 Most Valuable 2010 Quarter Worth Money

The Yellowstone and Yosemite designs in MS67 sit at the top of the list, with Denver-mint examples reaching up to $1,500. That’s a huge jump from face value for a coin you could theoretically pull out of a roll.

MS67 is a tough grade for clad quarters. The coin needs full original luster with only the tiniest bag marks—stuff you can’t even see without magnification. Most circulation strikes just don’t make it through handling that clean.

Silver DCAM proofs also show up throughout the top ten. “DCAM” means Deep Cameo—frosted, sculptural devices sitting on top of mirror-bright fields. It’s the highest proof designation PCGS and NGC hand out. The Hot Springs in PR70 DCAM hits $1,000, while other silver proofs in the rankings land between $545 and $600.

Mount Hood and Grand Canyon quarters fill out the rest, ranging from $600 to $960 depending on mint mark and grade.

History of the 2010 Quarter

The America the Beautiful Quarters program kicked off in 2010, picking up where the wildly popular 50 State Quarters series left off in 2008. Congress authorized it through the America’s Beautiful National Parks Quarter Dollar Coin Act of 2008 (Public Law 110–456), setting up a 12-year run.

The plan was to honor 56 national parks and historic sites covering all 50 states, the District of Columbia, and five U.S. territories. Five new designs dropped each year from 2010 through 2021.

Treasury Secretary Timothy Geithner picked the sites after consulting with governors and Interior Secretary Kenneth Salazar. Each site was honored in the order it was first officially established as a national site.

The 2010 lineup featured Hot Springs, Yellowstone, Yosemite, Grand Canyon, and Mount Hood. Here’s a fun detail: the satin finish quarters—sold only inside the annual 28-piece Uncirculated Mint Set—had a mintage of just 583,897 per design. Compare that to the tens of millions struck for circulation, and you can see why collectors pay attention to them despite their recent vintage.

Also Read: Top 100 Most Valuable Modern Quarters Worth Money List (1965-Present)

Is Your 2010 Quarter Rare?

Our Coin Identifier and Value App helps you identify rare 2010 quarters instantly—just scan your coin to see its rarity and value.

Key Features of the 2010 Quarter

Knowing what to look for on a 2010 quarter helps you spot fakes and appreciate the design work. Here’s what you’ll find on the obverse, reverse, and edge of these first-year America the Beautiful coins.

The Obverse of the 2010 Quarter

You’re looking at a restored version of John Flanagan’s 1932 George Washington portrait. The restoration sharpened subtle details and cleaned up the overall look compared to earlier versions.

The inscriptions read “UNITED STATES OF AMERICA,” “LIBERTY,” “IN GOD WE TRUST,” and “QUARTER DOLLAR,” all surrounding Washington’s left-facing profile. Look below “IN GOD WE TRUST” for the mint mark—P for Philadelphia, D for Denver, or S for San Francisco.

The Reverse of the 2010 Quarter

Flip it over and you’ll find the park name, state, “2010,” and “E PLURIBUS UNUM.” The year sits on the lower portion, with “E PLURIBUS UNUM” in the lower right area.

All five 2010 reverses were executed by Don Everhart, working from approved concepts. Here’s what each one shows:

Hot Springs: The park headquarters building façade with a thermal fountain in the foreground. Inscriptions read “HOT SPRINGS” and “ARKANSAS.”

Yellowstone: Old Faithful erupting in the background with a mature bull bison in the foreground—designed by Joseph Menna. Inscriptions include “YELLOWSTONE” and “WYOMING.”

Yosemite: El Capitan dominates the design, rising more than 3,000 feet above the valley floor as one of the largest exposed granite monoliths in the world. The coin bears “YOSEMITE” and “CALIFORNIA.”

Grand Canyon: The Nankoweap Granaries above the Nankoweap Delta in Marble Canyon near the Colorado River. These ancient structures, built between roughly 1050 and 1150 A.D., honor the park’s archaeological significance, with “GRAND CANYON” and “ARIZONA” inscribed on the coin.

Mount Hood: A scenic view of Mount Hood with Lost Lake in the foreground. The design features “MOUNT HOOD” and “OREGON.”

Other Features of the 2010 Quarter

Standard circulating quarters are cupro-nickel clad: 91.67% copper and 8.33% nickel. That copper core is why you see a reddish stripe on the edge—a quick way to tell it apart from a silver version.

Each coin weighs 5.670 grams and measures 0.955 inch (24.26 mm) in diameter with a thickness of 1.75 mm. The edge is reeded with the traditional ridged pattern.

Silver proof quarters contain 90% silver and 10% copper. As of early 2026, the silver melt value alone on these 90% silver coins is approximately $15–$16 per coin, depending on the spot price of silver. So even before any collector premium, you’re already well above face value.

Also Read: Top 30 Most Valuable State Quarters Worth Money List

2010 Quarter Mintage & Survival Data

Philadelphia mintages were pretty balanced across all five designs. Hot Springs led at 35,600,000, Yosemite came in at 35,200,000, and Yellowstone had the lowest Philly output at 33,600,000. Denver produced comparable numbers—34,800,000 Yosemite quarters and similar totals for the rest.

To put that in perspective, the combined Yellowstone output from both mints hit approximately 68.4 million coins. That’s enough to give one to roughly every five people in the U.S. at the time.

Then there are the satin finish quarters. Only 583,897 of each design were struck on specially sandblasted burnished planchets, sold exclusively in the 28-piece Uncirculated Mint Set. These were the last satin finish coins the U.S. Mint ever made—the format was killed after 2010.

San Francisco produced clad proofs at approximately 1.4 million per design and silver proofs at lower numbers—around 859,000 for Yosemite, for example. Nobody has done a formal survival study on the circulation strikes, so we don’t really know how many are still out there in collectible condition.

Also Read: Top 20 Most Valuable Bicentennial Quarter Worth Money List

The Easy Way to Know Your 2010 Quarter Value

Your 2010 quarter’s worth comes down to grade, mint mark, and whether it has any errors. Professional grading gives you a definitive answer but takes time and money.

Our Coin Identifier and Value App streamlines the entire process—simply photograph your coin to receive instant grade estimates, error detection capabilities, and current market values.

2010 Quarter Value Guides

Five designs, three mints, multiple finishes. Here’s what sets the valuable ones apart from pocket change.

The 2010 releases are:

• 2010 Hot Springs Quarter – First program release from Arkansas
• 2010 Yellowstone Quarter – Wyoming’s iconic park representation
• 2010 Yosemite Quarter – California’s granite monolith tribute
• 2010 Grand Canyon Quarter – Arizona’s ancient canyon heritage
• 2010 Mount Hood Quarter – Oregon’s final 2010 issue

Most circulated examples sit at face value. Uncirculated pieces pull modest premiums based on grade and mint mark. Silver proofs attract collectors chasing mirror-like finishes and top-pop registry coins.

The real money is in high-grade slabbed examples and specialty editions. Philadelphia and Denver strikes dominate availability, while San Francisco proofs offer that extra visual punch.

2010 Hot Springs Quarter Value

Did you know Hot Springs was federally protected in 1832—forty years before Yellowstone became the world’s first official national park? Native American tribes had visited its thermal waters for more than 8,000 years. That history made it a perfect choice to launch the America the Beautiful series.

The coin’s reverse shows the park headquarters building in Spanish colonial revival style. It hit circulation on April 19, 2010—first of the five 2010 designs to reach the public.

Circulated pieces trade near face value. At MS65 you’re looking at around $0.80. MS67 bumps that to roughly $16, and top-grade examples have sold for $175 to $259.

Silver proofs in PR68 bring approximately $20. The 5-ounce silver bullion version is a completely different kind of rare—only about 33,000 were struck, and PCGS had graded just 1,828 examples across all grades as of mid-2024.

The auction history for this quarter appears in the table below.

Recent activity over the past year is illustrated in the accompanying market chart.

2010 Yellowstone Quarter Value

If you’re only going to cherrypick one 2010 design from circulation, make it the Yellowstone—especially the Denver mint. The 2010-D Yellowstone ranks among the scarcest Washington America the Beautiful Quarters at high grades.

President Ulysses S. Grant signed Yellowstone into law on March 1, 1872, creating the world’s first national park. Old Faithful, shown on the reverse, was named during the 1870 Washburn–Langford–Doane Expedition for erupting every sixty to ninety minutes like clockwork. Joseph Menna designed the reverse with Jim Licaretz handling the engraving—a bison bull in the foreground with Old Faithful blasting behind it.

Here’s where the price gap gets interesting. A Philadelphia MS67 brings around $650. The same grade from Denver? $950. And if you somehow land a Denver MS68—good luck finding one—you’re looking at approximately $2,250. A 2010-D MS67 specimen realized $1,500 at auction in May 2021.

Here are the historical auction records for this coin across different grades.

The chart below tracks how collector demand has shifted over the past year.

2010 Yosemite Quarter Value

Common misconception: the rock formation on this coin is Half Dome. It’s not. It’s El Capitan—first ascended in 1958 by Warren Harding and later free-climbed by Lynn Hill in 1993. The park covers approximately 747,000 acres of California’s Sierra Nevada, and the quarter hit circulation on July 26, 2010.

Philadelphia and Denver together struck approximately 70 million Yosemite quarters for circulation. San Francisco’s silver proof mintage reached approximately 859,000—modest enough to support premiums at top grades.

The sleeper here is the satin finish version. Struck on specially sandblasted burnished planchets and only available through mint sets, SP69 examples command $250 to $825 depending on mint mark. I think these are underappreciated given how few exist. One Philly SP69 sold for $300 on eBay in 2023.

The table below covers all known auction appearances of this quarter.

Market patterns over recent months provide additional context for valuation.

2010 Grand Canyon Quarter Value

Most people expect a sweeping geological vista on this coin. Instead, designer Phebe Hemphill put the Nankoweap Granaries front and center. These ancient storage structures, built between roughly 1050 and 1150 A.D., sit above the Nankoweap Delta in Marble Canyon near the Colorado River. It’s an archaeological choice, not a scenic one—and I think it makes the design stand out from the rest of the 2010 set.

The Grand Canyon was first established as a national monument on February 20, 1893. This quarter was the last of the year’s five designs to reach the public, entering circulation on September 20, 2010.

Circulated pieces from Philly and Denver trade near face value. But well-preserved examples can reach $2,500 depending on surface quality and eye appeal. The auction record sits at $960 for an MS68, achieved at Heritage Auctions in December 2018.

There’s also a “Long Beach Treasure Hunt” version from Philadelphia with distinctive holder labeling. Only about 27 examples are certified so far, graded up to MS65, selling around $85.

Below you’ll find the complete auction history for this issue.

The chart displays market activity over the past year.

2010 Mount Hood Quarter Value

How often do both the Citizens Coinage Advisory Committee and the Commission of Fine Arts agree on a design? It happened here. Both panels picked the Lost Lake composition for its clean, unobstructed view of the mountain. The scene had appeared on countless postcards for decades, so it was instantly recognizable.

Philadelphia and Denver struck the circulation versions. MS67 examples from both mints have reached $650 at auction. San Francisco handled proof production only.

One thing worth knowing: 2010 was when “First Strike” designations really took off for ATB quarters. Grading services apply this label to coins submitted within 30 days of official release. It showed up far more often on these inaugural ATB coins than during the State Quarters era. First Strike specimens typically grade PR69 to PR70, with clad proofs trading from $17 to $115 and silver proofs from $20 to $80.

Complete auction records for every certified sale of this quarter are below.

Recent market trends appear in the twelve-month activity summary.

Also Read: 22 Rare Quarter Errors List with Pictures (By Year)

Rare 2010 Quarter Error List

The 2010 ATB series launched with five designs, and the mints made their share of mistakes along the way. Some of those mistakes are now worth serious money if you know what to look for.

1. Doubled Die Errors (DDO / DDR)

A doubled die happens when the die itself gets two slightly misaligned impressions during manufacturing. Every coin struck from that die shows overlapping design elements—doubled lettering, doubled date numerals, or doubled design features. It can show up on the obverse (DDO) or reverse (DDR).

Stronger doubling is worth more. It’s easier to see and harder to confuse with die polish lines. In 2020, GreatCollections auctioned a 2010-D Grand Canyon quarter graded MS65 with a confirmed doubled die error for $705—one of the better-documented 2010 ATB error sales.

A DDR variety has also been spotted on some 2010 Hot Springs quarters with doubling on the reverse legends. Those pieces run roughly $50 to $150 depending on how clear the doubling is and the coin’s grade.

2. Die Chip and Struck-Through Errors

Die chips are small raised bumps caused by tiny fragments breaking off the die face. They can appear anywhere on the coin. Bigger chips bring bigger prices—more dramatic, more collectible.

Heritage Auctions sold a 2010-P Yosemite quarter graded MS60 with multiple obverse die chip errors for $400. Even at that lower grade, significant chips pull real premiums.

Grease struck-through errors are related but different. Grease or debris trapped between the die and planchet blocks part of the design from transferring. You’ll see weakly struck or missing details in specific areas with an irregular, wispy look to the affected zone.

3. Clipped Planchet Errors

During the blanking process, the punch that cuts circular blanks from metal strips sometimes overlaps a previously punched hole or misaligns with the strip’s edge. The result is a quarter with a chunk of its rim missing—either a curved crescent (curved clip) or a straight edge (straight clip).

Here’s a cherrypicking tip: check the opposite side of the clip for the “Blakesley Effect.” You’ll see noticeably weaker design details and rim on the side directly across from the clip. That confirms it’s a genuine clip and not post-mint damage. A 2010-D Mount Hood quarter with a visible curved clip brought $1,100 at auction in MS65 grade.

4. Die Crack and Rim Cud Errors

Dies take a beating striking thousands of coins a day. Eventually they develop stress fractures that show up as raised lines across the coin’s surface. A rim cud is the extreme version—a piece of the die’s edge breaks away completely, and planchet metal flows into the gap, creating a raised, shapeless blob along the rim.

A 2010-D Arkansas Hot Springs quarter with a substantial die crack across Washington’s portrait sold for $1,040 in MS63 grade. A 2010-P specimen with a prominent rim cud brought $620 at MS60. Bigger cud, bigger premium.

5. Off-Center Strike Errors

When the planchet doesn’t seat properly between the dies, you get a design that’s shifted partially off the blank. One side shows bare metal while the opposite edge has partial design elements.

The sweet spot for collectors is 30–50% off-center. Those are far rarer and more valuable than 5–10% shifts. The key is whether the date and mint mark are still visible—if you can identify exactly what coin it is, the value jumps significantly.

6. Defective Clad Layer Errors

This one flies under the radar. Sometimes one of the outer copper-nickel layers is missing or poorly bonded to the copper core. GreatCollections has sold a 2010-P Grand Canyon quarter with a defective reverse clad layer graded NGC MS65. You get a striking visual contrast between the exposed copper and the intact obverse.

Planchet defect specialists love these. Certified examples typically trade in the $100–$400 range depending on how severe the defect is and the coin’s grade.

Where To Sell Your 2010 Quarter?

Check out now: Best Places To Sell Coins Online (Pros & Cons)

2010 Quarter Market Trend

*Market Trend Chart showing the number of people paying attention to this coin.

FAQ About the 2010 Quarter Value

1. What makes a 2010 quarter valuable?

Grade is the single biggest factor. An MS67 might exist in a few dozen examples, but an MS68 could sell for ten to a hundred times what an MS65 brings. High-grade mint state pieces, silver proofs, satin finish issues, and dramatic errors all see strong demand.

Getting your coin slabbed by PCGS or NGC authenticates the grade and makes it much easier to sell at full market value.

2. How can I tell if my 2010 quarter is silver?

Check the edge. A clad quarter shows a visible copper-colored stripe around the rim. A silver quarter’s edge is uniform silver all the way through. Silver versions carry an “S” mint mark below “IN GOD WE TRUST” and contain 90% silver and 10% copper.

These were only sold in special proof sets from the U.S. Mint. They never entered general circulation.

3. What errors should I look for on 2010 quarters?

The big ones: doubled die (DDO/DDR), clipped planchets, die chips, rim cuds, die cracks, off-center strikes, and defective clad layers. A 2010-D Grand Canyon doubled die sold for $705 at MS65. A 2010-D Mount Hood clipped planchet brought $1,100 at MS65. A 2010-D Hot Springs die crack went for $1,040 at MS63.

Bigger, more visible errors in uncirculated condition bring the strongest prices.

4. What is the satin finish on 2010 quarters and why does it matter?

Satin finish quarters were struck on specially sandblasted (burnished) planchets and sold exclusively in the 28-piece Uncirculated Coin Set. They never went into circulation. Each of the ten satin finish designs had a mintage of just 583,897—compare that to 33–35 million circulation strikes per design.

Here’s the kicker: 2010 was the last year the U.S. Mint made satin finish coins. The format was discontinued entirely, giving these a unique “last of their kind” status.

5. How many 2010 quarters were minted?

Philadelphia struck approximately 33.6 million Yellowstone quarters, 35.2 million Yosemite, and 35.6 million Hot Springs quarters. Denver produced comparable amounts for each design. Combined circulation output for Yellowstone totaled approximately 68.4 million coins.

San Francisco produced clad proofs at around 1.4 million per design and silver proofs near 860,000 per design.

6. Are 2010-D Yellowstone quarters really rarer than the others?

Yes. The total circulation mintage isn’t dramatically lower than other 2010-D issues, but very few examples have survived in MS67 or above. That’s what makes it a completely different kind of rare.

A Denver MS68 commands around $2,250, versus roughly $650 for the same grade from Philadelphia. A 2010-D MS67 specimen realized $1,500 at auction in May 2021.

7. What is DCAM and why does it affect my 2010 quarter’s value?

DCAM stands for Deep Cameo. It’s the highest designation for proof coins—heavily frosted devices against deeply mirrored fields, creating a dramatic visual contrast. PCGS and NGC both use this designation.

The difference in value is massive. A 2010-S Hot Springs Silver PR70 DCAM can sell for around $1,000. A standard PR68 of the same design? Maybe $9–$10.

8. What is the 5-ounce silver 2010 quarter and is it valuable?

In 2010, the U.S. Mint introduced the America the Beautiful 5-Ounce Silver Bullion coin alongside the standard quarters. At 3 inches in diameter, these are the largest coins ever struck by the U.S. Mint. They contain five troy ounces of .999 fine silver and feature the same park designs.

Only 27,000 pieces were struck due to initial production difficulties. Bullion versions (no mint mark) went to authorized dealers, while collector “Special Strike” versions carry a P mint mark and a vapor-blasted finish. PCGS had graded approximately 1,442 of the Hot Springs Special Strike across all grades as of mid-2024.

9. Should I clean my 2010 quarter before submitting it for grading?

Never. Even gentle polishing or a soap rinse strips the coin’s natural luster and leaves microscopic hairlines. Grading services will flag it as “cleaned” and give it a details grade instead of a numeric grade. That kills the value.

Store it in a clean coin flip or hard plastic holder and submit it as-is.

10. Is it worth getting a 2010 quarter professionally graded by PCGS or NGC?

Grading runs $20 to $150 per coin depending on service tier and turnaround speed. For average circulated 2010 quarters, it’s not worth it.

But if your coin looks MS67 or better, has a confirmed error, or is a silver proof that might grade PR70—certification can multiply the selling price. This is especially true for Denver-mint issues and satin finish specimens where the population at top grades is tiny.