2009 Dime Value Checker: Errors List, “P”, “D” & “S” Mint Mark Worth

2009 Dime value ranges from $0.10 face value to $649. That record belongs to a 2009-P Dime graded 67, sold through Heritage Auctions in June 2018. If you want to know what yours is worth, upload a photo of your coin below for a quick value range. Then scroll down to see recent eBay sales and get a feel for what buyers are paying right now.

 

2009 Dime Value By Variety

Here’s a full breakdown of 2009 dime values across all varieties and grades. If you already know your coin’s grade, jump to the Value Guides section for exact pricing.

Also Read: Roosevelt Dime Value (1946-Present)

 

Top 10 Most Valuable 2009 Dimes Worth Money

The top spot belongs to a 2009-P MS67FB that hammered for $649 on eBay on June 25, 2018. That price came down to one thing: a razor-sharp torch strike on a coin almost nobody bothered to save from pocket change. At that grade with Full Bands, the certified population is tiny, and two bidders fighting over it pushed the price into record territory.

The 2009-S PR70DCAM follows at $226 — a perfect proof. The 2009-D MS67FB rounds out the top three at $200, riding Denver’s historically low mintage. The 2009-P SP69 Satin Finish hit $149 in January 2023, and the 2009-D Satin Finish SP69 sits at $120. Those satin finish coins give you a more affordable way into premium 2009 dimes without hunting for top-tier business strikes.

Across the board, grade and strike quality drive the money. Coins with the Full Bands (FB) designation — where the horizontal bands on the torch are fully separated and complete — sell for several times more than standard uncirculated examples at the same numeric grade.

 

History of The 2009 Dime

The Roosevelt dime launched in 1946, designed by John R. Sinnock to honor FDR after his death in 1945. The dime denomination was chosen because of Roosevelt’s personal connection to the March of Dimes, the polio-fighting organization he helped create.

The year 2009 sat right in the teeth of the Great Recession (December 2007 to June 2009). Massive job losses, collapsed home values, and frozen consumer spending meant people simply weren’t buying things — and weren’t breaking bills into coins.

Banks found themselves swimming in coins nobody was spending. They slashed their orders from the Federal Reserve. The Fed cut its requests to the Mint. The Mint cut production.

On April 23, 2009, the U.S. Mint officially suspended coinage of Jefferson Nickels and Roosevelt Dimes for the rest of the year. Numismatic journalist Paul Gilkes reported the announcement in *Coin World*, noting staggering surpluses already on hand: 78.5 million dimes at Philadelphia and 41.5 million at Denver by end of March alone.

The final numbers were stunning. Philadelphia struck 96,500,000 dimes. Denver struck just 49,500,000. That’s a combined 146 million coins — an 86.1% reduction from the 1.05 billion dimes minted in 2008 alone.

The 2009-D’s 49.5 million mintage is the lowest for any circulation-strike Roosevelt Dime in the clad era (post-1964) and the lowest overall since the 1958 Roosevelt Dime at 31,910,000 — but that coin had 90% silver going for it. The 2009-D is the low-mintage king of the modern clad series.

Also Read: Top 100 Most Valuable Roosevelt Dimes Worth Money List

 

Is Your 2009 Dime Rare?

Wondering if your 2009 dime is valuable? Download our Coin Identifier and Value App today to instantly check its rarity, current market value.

 

Key Features of The 2009 Dime

The 2009 Roosevelt Dime carries the same John R. Sinnock design that’s been on every dime since 1946. Nothing changed — same portrait, same torch reverse. Nearly eight decades of the same design makes this one of America’s longest-running coin series.

The Obverse Of The 2009 Dime

Roosevelt’s left-facing bust dominates the coin. LIBERTY sits in the northwest quadrant, right in front of his face. IN GOD WE TRUST appears in smaller letters below his chin.

Look at the neck truncation — you’ll see the initials JS for John R. Sinnock, the Mint’s Chief Engraver. The date 2009 sits slightly above the motto, and the mint mark — P for Philadelphia, D for Denver, or S for San Francisco — appears above the date. That placement has been standard on all Roosevelt dimes struck after 1967.

The Reverse Of The 2009 Dime

Flip it over and you’ll see the central torch (liberty), flanked by an olive branch (peace) on the left and an oak branch (strength) on the right. E PLURIBUS UNUM runs across the top, with UNITED STATES OF AMERICA and ONE DIME also inscribed.

The Full Bands (FB) designation from PCGS is what you’re after — it means the twin horizontal bands on the torch are fully and cleanly separated. NGC uses a slightly stricter version called Full Torch (FT), which also requires defined vertical lines on the torch body. Either designation adds serious money to your coin’s value.

Other Features Of The 2009 Dime

The 2009 dime uses the standard copper-nickel clad composition from 1965: 75% copper and 25% nickel bonded over a pure copper core. It weighs 2.27 grams and measures 17.90 millimeters in diameter, with a reeded (ridged) edge. The silver proof version from San Francisco contains 0.07234 troy ounces of pure silver and weighs 2.50 grams — so if you have a precision scale, that’s the quickest way to tell them apart.

Also Read: Top 100 Rarest Dimes Worth Money (Most Expensive)

 

2009 Dime Mintage & Survival Data

Philadelphia struck 96,500,000 circulation dimes. Denver struck just 49,500,000. Combined, that’s 146 million — compared to over one billion in a typical year. That’s an 86.1% reduction from 2008 levels, all thanks to the Great Recession.

Collector-issue numbers were modest too. The 2009-S DCAM (clad proof) came in at 1,482,502, while the 2009-S Silver DCAM reached only 697,365 pieces. Both the 2009-P and 2009-D Satin Finish Special Strike Dimes had identical mintages of 784,614 coins each, produced exclusively for the Uncirculated Mint Set.

Here’s the kicker: the 2009-D business strike was not included in that year’s Mint Sets. That removed the main source of well-preserved, original-roll examples. High-grade 2009-D business strikes may be even scarcer than the already-low mintage suggests. As of April 2025, PCGS had certified only 2 examples of the 2009-D business strike in MS68FB — the absolute ceiling for this coin.

Compare that to the 2009-D Satin Finish, which has a PCGS MS69FB population of 367 coins. Careful handling of collector set coins produces a much bigger certified population than coins pulled from circulation. That’s a huge gap.

Also Read: Top 70+ Most Valuable Mercury Dimes Worth Money (Chart By Year)

 

The Easy Way to Know Your 2009 Dime Value

Your 2009 dime’s value comes down to condition, strike quality (especially Full Bands), mint mark, and whether it’s a business strike, satin finish, or proof. A worn circulated coin is worth face value. An MS67FB example can be worth hundreds.

Skip the guesswork — use our Coin Identifier and Value App for instant, accurate assessments. Upload a photo and get a professional-grade evaluation based on current market data.

 

2009 Dime Value Guides

The 2009 Roosevelt dime comes in six distinct varieties, each with its own production method, finish, and collector demand.

• 2009-P Dime: Standard circulation strike from the Philadelphia Mint, with no mint mark visible on older examples but a P mark above the date on all 2009 issues.
• 2009-D Dime: Regular circulation issue from Denver — the lowest-mintage clad-era Roosevelt Dime struck for commerce.
• 2009-S DCAM Dime: Deep Cameo (DCAM) clad proof from San Francisco, featuring heavily frosted devices against mirror-polished fields.
• 2009-S Silver DCAM Dime: 90% silver composition proof with the same Deep Cameo finish, sold only within the 2009 Silver Proof Set.
• 2009-P Satin Finish Special Strike Dime: Philadelphia Mint collector-only issue with a distinctive matte satin surface, found only in the 2009 Uncirculated Mint Set.
• 2009-D Satin Finish Special Strike Dime: Denver equivalent of the satin finish issue, struck to the same high standard and sold in the same set.

From 2005 to 2010, U.S. Mint Sets contained satin finish coins instead of standard business strikes. PCGS classifies these as Specimen (SP) coins, while NGC labels them SMS (Special Mint Set). Because they were handled carefully and never circulated, most grade SP67 or higher.

Condition is the single biggest value driver for all 2009 Roosevelt Dimes. Original luster, freedom from bag marks, and Full Bands on the torch can multiply a coin’s value many times over compared to a standard example at the same numeric grade.

 

2009-P Dime Value

What would you pay for a dime from pocket change? Standard uncirculated 2009-P examples in MS65 trade in the $1.50–$6 range. Affordable enough for anyone starting a Roosevelt set.

Things get interesting fast at higher grades. MS67 without Full Bands runs about $60. Add Full Bands and you’re looking at $450. The auction record — $649.42 on eBay on June 25, 2018 — shows what an MS67FB can bring when two serious bidders go at it.

The 2009-P business strike wasn’t included in Mint Sets, so every high-grade survivor had to come from circulation or bank rolls. If you stashed fresh rolls back in 2009, you might be sitting on a gem and not even know it.

The PCGS population at MS67FB is razor-thin. That seven-fold premium between standard MS67 and MS67FB tells you exactly how much the market rewards a sharp, complete torch strike.

Market activity demonstrates steady collector interest throughout the past year.

 

2009-D Dime Value

Just 49,500,000 struck. That’s it. The 2009-D is the undisputed low-mintage king of the modern clad Roosevelt series. No other circulation-strike clad dime comes close. The only Roosevelt Dime with a lower overall mintage is the 90% silver 1958 at 31,910,000 pieces — and that one has its silver content propping up demand.

Denver’s exclusion from the 2009 Mint Sets killed the main preservation pathway. Most of these coins went straight into cash registers and vending machines. Only roll-searchers and lucky shoppers saved uncirculated examples. As of April 2025, PCGS has certified only 2 examples in MS68FB and NGC has certified only 80 coins in MS67FT. That’s a genuinely tiny certified population at top grades.

Circulated pieces still trade near face value. Individual uncirculated coins bring $2–$3. Original bank rolls command around $30 — roughly six times face. At the top of the certified market, MS67FB examples trade in the $200–$350 range.

Here’s the counterintuitive part: the satin-finish version has a PCGS MS69FB population of 367 coins, versus just 2 at MS68FB for the business strike. The satin finish coins are technically rarer by mintage but far more common in top grades because they were babied in collector sets. I think the business strikes are the real prizes here.

Market activity demonstrates growing awareness of this date’s distinctive production circumstances.

 

2009-S DCAM Dime Value

Got a 2009-S proof dime but not sure if it’s clad or silver? Weigh it. 2.27 grams means clad. 2.50 grams means silver. That 0.23-gram difference separates two completely different market tiers.

Deep Cameo (DCAM) means heavily frosted raised design elements against deeply mirrored flat fields. Modern U.S. proofs are expected to hit DCAM standards, and virtually all 2009-S examples do.

Slabbed PR69DCAM examples typically trade around $14. PR70DCAM coins — absolute perfection — reach about $20. One PR70 hit $226 back in 2012 during peak market enthusiasm, but prices have settled as more examples got graded.

With a mintage of 1,482,502, finding one isn’t hard. But PR70 coins certified by PCGS or NGC always carry a premium over raw proofs. For collectors building complete modern proof sets, this is a reliable, predictable buy.

Detailed auction records below chronicle pricing performance across grade levels and market cycles.

The chart illustrates active market dynamic and sustained collector engagement.

 

2009-S Silver DCAM Dime Value

A common misconception: the silver proof must be worth way more than the clad. Not always true. At PR70, both versions trade at nearly the same price — showing that the modern proof market cares more about technical perfection than metal content.

Each 2009-S silver dime contains 0.07234 troy ounces of pure silver, giving it a melt value floor of roughly $1.60–$3.50 depending on spot price. That doesn’t drive collector pricing at higher grades, but it does set a meaningful floor.

PR69 specimens now trade around $12, down from about $20 a decade ago. PR70 examples go for roughly $22, down from $65 before 2018. More coins getting slabbed without matching demand growth explains the slide.

You can’t buy this coin individually. It only came in the 2009 Silver Proof Set, which originally retailed at $52.95 and contained eighteen coins. About 697,365 sets were produced, so finding one isn’t a challenge — but you’re committing to the whole set.

Historical auction records for this piece appear in the table below.

And recent market activity over the past twelve months is shown in the accompanying chart.

 

2009-D Satin Finish Special Strike Dime Value

SP68 for $9. SP69 with Full Bands for $38. That’s the 2009-D Satin Finish market in a nutshell — affordable and predictable.

These coins were struck on burnished planchets (blanks polished before striking) using specially prepared dies and higher-than-normal pressure. The result is a distinctive satin-like surface that sits between a proof mirror and ordinary circulation luster. They came exclusively in the 2009 Uncirculated Mint Set (36 coins, $27.95 original retail). About 784,614 sets were produced, and careful packaging kept most examples in the SP67 to SP69 range. PCGS calls them Specimen (SP) coins; NGC uses SMS (Special Mint Set).

The highest auction record is $120, set in March 2019. No fireworks — just steady collector demand for a well-made coin.

 

2009-P Satin Finish Special Strike Dime Value

If you’re cherrypicking satin finish dimes for Full Bands, the Philadelphia version is the one to watch. While most examples land in the SP67 to SP68 range, specimens with fully separated horizontal bands on the torch earn the FB designation from PCGS — and that’s where the premiums kick in.

Philadelphia used the same burnished planchet process and specially prepared dies as Denver, striking about 784,614 pieces exclusively for the Uncirculated Mint Set.

Standard SP68 pieces trade in the $3–$10 range. SP69 with Full Bands? $45. The auction record of $149 for an SP69FB was set in January 2023, showing this variety still has active demand.

Reviewing past sales provides context for understanding the coin’s current market position.

Also Read: 16 Rare Dime Errors List with Pictures (By Year)

 

Rare 2009 Dime Error List

Error coins from 2009 are worth hunting for, and the date’s historically low mintage makes them even more interesting. Fewer coins struck means fewer errors survived — so a well-documented 2009 error dime can be harder to find than you’d expect.

1. Lamination Crack Error

Lamination errors happen when impurities get trapped inside the planchet during alloying or rolling. That creates internal stress that can crack, peel, bubble, or split the surface — sometimes producing a dramatic “clamshell” effect where both sides of a crack lift away from the core.

These are some of the highest-priced 2009 dime errors. In 2020, Heritage Auctions sold a 2009-P Roosevelt Dime graded MS63 with an obverse lamination crack error for $865. A big lamination peeling off an otherwise clean coin — that’s what drives those numbers.

2. Feeder Finger Scrapes Error

Feeder fingers are the mechanical arms that position each planchet into the striking collar. They’re supposed to retract before the dies come down. When they don’t retract fast enough, the dies contact the fingers and leave distinctive scratch-like marks across the coin’s surface.

Bigger, more visible scrapes bring bigger premiums. Faint marks you need a loupe to see? More modest results. In 2020, GreatCollections sold a 2009-P Roosevelt Dime graded MS62 with a feeder finger error for $615 — a strong number for any modern dime error.

3. Die Clash Errors

A die clash happens when the obverse and reverse dies smack into each other with no planchet between them. The striking pressure transfers part of each die’s design onto the other. Every coin struck afterward from those damaged dies shows ghost-like outlines of the wrong side — torch and branches faintly visible on the obverse, or Roosevelt’s portrait ghosting onto the reverse.

Clarity is everything with these. A 2009-P dime graded MS62 with a reverse die clash sold on eBay for $390. For context, a 2008-P dime with a similar obverse die clash sold for $748 at a 2020 Heritage Auctions sale — giving you an idea of what a premium 2009-date example could bring.

4. Grease Struck-Through Error

This one happens when die lubricant — often mixed with metal dust and debris — covers part of the die surface during striking. The grease blocks the die from fully impressing the design, leaving weak, flat, or missing details in the affected area.

Collectors often mistake this for a weak strike or planchet flaw, so getting it authenticated is key. In 2020, a 2009-D Roosevelt Dime graded MS64 with an obverse grease struck-through error sold on eBay for $420.

5. Off-Center Strike Errors

Off-center coins happen when the planchet isn’t properly centered in the collar at the moment of striking. The percentage off-center matters a lot: 40% to 60% off-center with a visible date is the sweet spot for collectors.

Silver Roosevelt dimes that are 10% to 15% off-center are worth $20 or more, while those 40% to 60% off-center can fetch $200 or more. Roosevelt Dimes are relatively common as off-center strikes overall, so you need a truly dramatic example to stand out.

6. Doubled Die Obverse (DDO) Error

A DDO happens during die manufacturing, not during striking. The hub gets pressed into the working die multiple times, and if it shifts even slightly between impressions, every coin from that die shows doubling on the obverse.

Here’s the key to cherrypicking: genuine DDO doubling looks rounded, with both images at the same raised height. Mechanical doubling is flat and shelf-like — and worthless. For 2009-D dimes, CONECA databases list a documented DDO variety. Grab a loupe and check the date digits, LIBERTY, and IN GOD WE TRUST.

7. Improperly Annealed Planchet Error

Before striking, planchets get annealed — heated and slowly cooled — to soften the metal for a proper die impression. When that process goes wrong, the planchet comes out too hard or too soft. The resulting coin shows unusual color, abnormal luster, or a surface texture that looks obviously different from normal examples.

The 2009-D improperly annealed error has been documented. These coins typically have a blotchy or discolored look compared to properly struck pieces. Values depend on how dramatic the error looks, but eye-catching examples attract real collector interest.

 

Where To Sell Your 2009 Dime?

After understanding your 2009 dime’s value, rarity, and potential, selecting the right selling platform becomes crucial for maximizing returns.

Check out now: Best Places To Sell Coins Online (Pros & Cons)

 

2009 Dime Market Trend

*Market Trend Chart showing the number of people paying attention to this coin.

 

FAQ About 2009 Dime Value

1. Is the 2009 dime rare or valuable?

The 2009-D has the lowest mintage of any circulation-strike Roosevelt Dime in the clad era — just 49,500,000 pieces. That’s also the lowest overall dime mintage since the 1958 silver Roosevelt Dime at 31,910,000. The 86.1% production drop from 2008 was entirely driven by the Great Recession.

Circulated? Worth face value. But high-grade certified examples with Full Bands are genuinely scarce. PCGS reports only 2 coins graded MS68FB for the 2009-D business strike as of April 2025. That kind of top-pop rarity separates these from ordinary modern issues.

2. How much is a circulated 2009 dime worth?

A worn 2009 dime — P or D — is worth $0.10. Melt value is only about $0.02, so there’s no metal premium in circulated condition.

Both the 2009-P and 2009-D run around $1.50 in uncirculated MS65. The jump happens at MS67, especially with Full Bands: $60 without FB, $450 or more with it.

3. What does “Full Bands” mean on a 2009 dime?

Full Bands (FB) is a strike-quality designation from PCGS. It means the two horizontal bands wrapping around the torch on the reverse are fully and cleanly separated — a clear gap between upper and lower bands across the entire torch. NGC’s stricter equivalent, Full Torch (FT), also requires defined vertical lines on the torch body.

The value difference is enormous. A 2009-P MS67 without Full Bands is worth around $60. The same coin with Full Bands sold for $649. Only PCGS or NGC certification can reliably confirm whether your coin qualifies.

4. What is the difference between the 2009-S clad and silver proof dimes?

Identical designs, identical Deep Cameo finish. The differences are composition and weight. The clad version weighs 2.27 grams (copper-nickel over copper core, no precious metal). The silver version weighs 2.50 grams, contains 0.07234 troy ounces of pure silver, and carries a small melt value floor.

Here’s what surprises people: despite the silver version having a lower mintage (697,365 vs. 1,482,502) and higher intrinsic value, PR70 examples of both trade at nearly the same price. The modern proof market rewards technical perfection over metal content.

5. Should I save my 2009 dimes?

If you find one in nice uncirculated condition, yes. The historically low mintage, exclusion from Mint Sets (for the D mint), and the recession backstory give these coins stronger long-term appeal than most modern dimes.

Condition is everything though. MS65 or below will likely always be a dollar or two. MS67 or higher with Full Bands? That’s a genuinely rare coin that registry set builders want.

6. How do I tell a 2009-D dime from a 2009-P dime?

Check the obverse just above the date 2009. A D means Denver. A P means Philadelphia. All 2009 Philadelphia business strikes carry the P mint mark.

The 2009-D is the more valuable variety because of its dramatically lower mintage (49.5 million vs. 96.5 million for the P). Both coins look nearly identical otherwise, so the mint mark is your only reliable tell.

7. What 2009 dime errors are worth the most money?

The big ones: a 2009-P MS63 with an obverse lamination crack error sold for $865 at Heritage Auctions in 2020; a 2009-P MS62 with feeder finger scrapes fetched $615 at GreatCollections in 2020; and a 2009-D MS64 with an obverse grease struck-through error sold for $420 on eBay in 2020.

Die clash errors have brought around $390 on eBay. Off-center strikes in the 40–60% range can fetch $200 or more. Get any error coin slabbed by PCGS or NGC before selling — certification dramatically boosts buyer confidence and final price.

8. What is the PCGS population for the 2009-D dime?

As of April 2025, PCGS had certified only 2 examples of the 2009-D business strike in MS68FB — the highest known grade. NGC has certified 80 examples in MS67FT. Those are remarkably low numbers for a coin with a 49.5-million mintage, reflecting both the scarcity of well-preserved survivors and limited grading submissions.

The 2009-D Satin Finish tells a different story: 367 coins at PCGS MS69FB. Careful collector handling produces far more top-grade survivors than circulation releases, even with similar mintage numbers.

9. Are 2009 dime Satin Finish coins worth more than regular business strikes?

In most grades, no. Business strikes carry stronger premiums. That seems backwards since satin finish coins were made for collectors and handled with care. But because they survive in far greater numbers at top grades (367 at MS69FB for satin finish vs. 2 at MS68FB for business strike), the rarity premium belongs to the business strikes.

The best satin finish 2009-D examples trade around $7–$18 in SP67–SP68. Business strikes in comparable grades are worth several times more. We think a 2009-D MS68FB business strike would set a new record well above the current $200 benchmark if one came to market.

10. How does the 2009 dime compare to other low-mintage modern Roosevelt dimes?

The 2009-D’s 49.5-million mintage is unmatched among clad-era circulation strikes. The 1996-W dime had under 1.5 million — but it was struck at West Point exclusively for collector sets and never meant for circulation.

Among true circulation strikes, the 2009-P’s 96.5 million is also very low by modern standards. The series regularly saw mintages above one billion in the years right before 2009. That decade of billion-coin years makes the 2009 production collapse all the more dramatic.