2006 Dime Value (2026 Guide): Errors List, “P”, “D” & “S” Mint Mark Worth

Most 2006 dimes in your pocket change are worth exactly face value — ten cents. But the full range of 2006 Dime value stretches from that ten cents all the way past $1,000 for the rarest error coins.

The key factors are condition, variety, and strike quality. A high-grade Full Bands example — meaning the torch bands on the reverse show complete, unbroken separation — can be worth five to ten times more than a regular coin at the same grade.

 

2006 Dime Value By Variety — Quick Reference Chart

This is a value reference chart for 2006 dimes, showing market valuations for different versions and condition grades.

If you know the grade of your coin, you can find the exact price below in the Value Guides section.

Also Read: Roosevelt Dime Value (1946-Present)

 

Top 10 Most Valuable 2006 Dime Worth Money

This chart records the highest auction prices for 2006 Roosevelt dimes, with a range from $56 up to $4,406.

The single most surprising result is the 2006-D Satin Finish MS61, which sold for $4,406 — roughly ten times the next-highest price on the list. An MS61 is actually a relatively low grade with visible marks and imperfections. A price anomaly this dramatic almost always points to a unique mint error or an unusual bidding circumstance at auction.

For the remaining coins, the pattern is more predictable. Coins grading MS67 through MS70 typically land in the $150–$426 range, showing a normal positive relationship between grade and price.

One standout: a regular-strike 2006-P MS67 brought $426, which is actually more than some proof versions at lower grades. This shows that scarcity and market demand drive value, not just coin type alone.

 

History Of The 2006 Dime

The Roosevelt dime was introduced on January 30, 1946 — President Franklin D. Roosevelt’s birthday — just months after his death in April 1945. The dime was selected as the tribute coin because Roosevelt co-founded the March of Dimes, an organization dedicated to fighting polio, a disease he himself had contracted at age 39.

Chief Engraver John R. Sinnock designed both the obverse portrait and the reverse torch design. His initials “JS” appear as small letters just below Roosevelt’s neckline. The reverse torch symbolizes liberty, flanked by an olive branch for peace and an oak branch for strength.

The year 2006 marked the 60th anniversary of this beloved series. To observe the milestone, the U.S. Mint continued producing special Satin Finish coins that had been introduced in 2005 — a format that ran exclusively from 2005 through 2010.

These Satin Finish coins were struck using burnished blanks and specially prepared dies, giving them a unique surface texture that sits between a regular circulation strike and a full proof coin. They were sold only in annual Uncirculated Mint Sets, never released into general circulation.

The year 2006 also arrived at a significant economic crossroads. The U.S. housing bubble — which had driven years of consumer prosperity — began to visibly slow. Economists later identified 2006 as the turning point that preceded the 2007–2009 financial crisis. Against that backdrop, the humble Roosevelt dime quietly celebrated six decades of continuous production.

Also Read: Top 100 Most Valuable Roosevelt Dimes Worth Money List

 

Is Your 2006 Dime Rare? Rarity Chart

Want to know the value of your 2006 Dime? Scan it with the CoinValueChecker App to get a professional assessment and market price instantly. Intelligent identification of error coins makes collecting easier!

 

Key Features Of The 2006 Dime

Understanding the design and physical characteristics of the 2006 Roosevelt dime helps you authenticate your coin and spot potential varieties or errors. This section covers both sides and the coin’s technical specifications.

The Obverse Of The 2006 Dime

The obverse shows a left-facing portrait of President Franklin D. Roosevelt, taking up most of the coin’s face. “LIBERTY” arcs along the left edge, while “IN GOD WE TRUST” sits in smaller letters beneath his chin.

The date “2006” appears at the lower right, just below Roosevelt’s neck truncation. Right underneath the neckline, the tiny initials “JS” identify the designer — Chief Engraver John R. Sinnock, who created this design in 1946.

The mint mark sits on the obverse above the date. A “P” indicates Philadelphia, “D” indicates Denver for circulation strikes, and “S” indicates San Francisco on proof coins.

The Reverse Of The 2006 Dime

The reverse centers on a torch, symbolizing liberty and enlightenment. An olive branch on the left represents peace, and an oak branch on the right represents strength and independence.

The Latin motto “E PLURIBUS UNUM” (out of many, one) runs horizontally through the base of the torch and between the branches, with centered dots separating the three words. “UNITED STATES OF AMERICA” runs along the upper rim, and “ONE DIME” sits at the bottom.

This reverse design has remained essentially unchanged since 1946. That makes it one of the longest-running reverse designs in all of American coinage history.

Other Features Of The 2006 Dime

The 2006 dime uses the standard clad specifications established in 1965. The coin measures 17.90 mm in diameter, weighs 2.27 grams, and is approximately 1.52 mm thick — making it the thinnest circulating U.S. coin.

The composition is a copper-nickel outer layer (75% copper, 25% nickel) bonded to a pure copper core, giving the coin its silver-like appearance despite containing no actual silver. The edge features reeding — vertical grooves around the circumference — inherited from historical silver coinage as a security feature.

The sole exception is the 2006-S Silver Proof, which is struck in the traditional 90% silver composition and weighs slightly more as a result.

Also Read: Top 100 Rarest Dimes Worth Money (Most Expensive)

 

2006 Dime Mintage & Survival Data

The Philadelphia and Denver mints combined for over 2.8 billion circulation dimes in 2006. That enormous output makes high-grade gems scarcer in relative terms — with so many coins produced so quickly, die fatigue sets in fast, and sharp, fully detailed strikes become hard to find.

According to PCGS CoinFacts, expert numismatist Jaime Hernandez notes that the 2006-D is easy to find up through MS66, becomes much scarcer at MS67, and anything above MS67 is very scarce to rare. The same general pattern applies to the Philadelphia issue.

Proof coins tell a very different survival story. Both the clad and silver proof versions were sold directly to collectors in protective packaging, resulting in survival rates exceeding 94%.

The Satin Finish special strike coins occupy the middle ground. Each Philadelphia and Denver issue had a mintage of 847,361 pieces. Because these were sold exclusively in collector sets — never circulated — their preservation rate is estimated to be much closer to proofs than to circulation strikes.

Also Read: Top 70+ Most Valuable Mercury Dimes Worth Money (Chart By Year)

 

The Easy Way to Know Your 2006 Dime Value

Determining a 2006 dime’s true value requires evaluating mint marks, strike quality, Full Bands designation, and current market conditions — factors that demand specialized knowledge and equipment.

CoinValueChecker App eliminates this complexity entirely. Simply scan your coin, and our AI instantly analyzes all critical features, compares against thousands of auction records, and delivers an accurate market valuation in seconds. Professional-grade assessment, right in your pocket.

 

2006 Dime Value Guides — All Six Varieties

The 2006 Roosevelt dime series offers six distinct varieties, each serving a different role in the numismatic market. Here is a quick list of what was produced:

• 2006-P Dime
• 2006-D Dime
• 2006-S DCAM Dime
• 2006-S Silver DCAM Dime
• 2006-P Satin Finish Special Strike Dime
• 2006-D Satin Finish Special Strike Dime

Philadelphia and Denver produced standard circulation strikes for everyday commerce. These entered banks and cash registers across the country, providing entry-level collecting opportunities as well.

San Francisco produced two proof versions for collectors only. The clad proof features the Deep Cameo (DCAM) contrast effect — frosted devices against mirror-like fields. The silver proof uses the same visual quality but in traditional 90% silver composition.

The Satin Finish special strikes from both Philadelphia and Denver sit between circulation coins and true proofs in terms of finish and purpose. They were sold exclusively in annual Uncirculated Mint Sets.

 

2006-P Dime Value

The Philadelphia Mint struck 1,381,000,000 dimes in 2006. That’s over 1.38 billion coins — so circulated examples are plentiful and generally worth only face value.

Condition is where things get interesting. Uncirculated MS65 examples trade around $7–$8. The Full Bands (FB) designation — awarded by PCGS when the torch’s horizontal bands show complete, unbroken separation — can push that figure significantly higher at top grades.

At MS67 Full Bands, the auction record reached $250. Finding a true high-grade Full Bands example from this massive production run requires patience, since high-speed production causes die fatigue quickly and weak strikes are common.

Market activity fluctuations are worth noting. This chart shows trading activity between buyers and sellers across different periods.

 

2006-D Dime Value

The Denver Mint produced 1,447,000,000 dimes in 2006 — even more than Philadelphia. Like its counterpart, circulated examples are virtually everywhere and worth face value.

Market data shows MS66 and below are easy to obtain. MS67 becomes much scarcer, and MS68 or above is very scarce to rare. This “steep grade cliff” creates a sharp pricing curve: MS65–MS66 examples trade in the $5–$7 range, but MS67 jumps to around $27.

The auction record for this coin is $282, set by an NGC MS68 example sold at Heritage Auctions in December 2014. For a modern coin from a billion-plus mintage, that’s a solid result. Unless you have an MS68 gem, though, most 2006-D dimes serve as affordable “set fillers” for date-set collectors.

Market activity in the secondary market reflects the collector community’s true interest in this coin.

 

2006-S DCAM Dime Value

The 2006-S clad proof dime was struck only at San Francisco and never entered circulation. Its mintage reached over 2 million pieces — nearly double that of the silver version — positioning it as an accessible collectible from the start.

“DCAM” stands for Deep Cameo, a designation given to proof coins whose fields (flat background areas) are deeply mirror-like and whose raised design elements carry heavy frost. This contrast effect is the hallmark of a high-quality proof coin.

Current market prices typically range from $4 to $15. A PR70 example sold for $330 at GreatCollections in July 2012, showing that even perfect grades have struggled to break the four-digit threshold on this variety.

Because San Francisco had been producing clad proof dimes since 1968, the process was highly refined by 2006. Most examples achieve PR68–PR70 Deep Cameo grades without difficulty, which ultimately suppresses any scarcity premium.

Auction data over the years tells us how this clad proof stacks up against its silver counterpart in terms of collector value.

Market data patterns show whether collectors are actively buying and selling this particular proof variety.

 

2006-S Silver DCAM Dime Value

The 2006-S Silver Proof Dime was struck in 90% silver with a mintage of approximately 1,054,000 pieces. Note: the U.S. Mint began offering silver proof sets again in 1992 after a 27-year gap — so any silver proof dime dated 1992 or later is a modern collector issue, not a pre-1965 silver coin.

Each coin contains 0.0723 troy ounces of silver. At current silver prices, this provides a meaningful price floor even if collector demand softens. Market retail prices typically range from $7 to $12.

A PR69 example sold for $12 at GreatCollections in October 2012. A PR70 brought $161 at Heritage Auctions in April 2007, though silver market conditions and collector enthusiasm have shifted since then.

Like the clad proof version, San Francisco’s refined striking process means most examples easily achieve PR68–PR70 Deep Cameo grades. Abundant supply in top condition directly limits how much premium collectors are willing to pay.

Historical sales data illustrates how this silver proof has performed in the auction market over time.

Market activity levels reveal how actively this coin is being bought and sold among collectors.

 

2006-P Satin Finish Special Strike Dime Value

The 2006-P Satin Finish Special Strike Dime came from a unique minting process the U.S. Mint introduced in 2005. These coins were produced using burnished blanks and specially prepared dies, creating a soft, velvety surface that is distinct from both a standard circulation strike and a traditional proof.

Only 847,361 were minted, and none were released into circulation — sold exclusively in annual Uncirculated Mint Sets. Grading services use the “SP” (Specimen) prefix for these coins, reflecting their intermediate status.

Most examples naturally grade SP67–SP68. SP69 examples are much harder to find, and SP70 specimens are extremely rare. A 2006-P Satin Finish Dime graded SP69 sold for $40 on eBay in August 2018.

The Satin Finish program ran from 2005 through 2010, after which the U.S. Mint returned to a standard brilliant finish for Mint Set coins starting in 2011. This makes the 2005–2010 window a distinct and collectible sub-series of the Roosevelt dime.

For those interested in the historical price performance of this coin at auction, the Auction Record Chart below provides detailed insights.

 

2006-D Satin Finish Special Strike Dime Value

The 2006-D Satin Finish Special Strike Dime shares the same 847,361-piece mintage as its Philadelphia counterpart. Like the Philadelphia version, it was sold only in Uncirculated Mint Sets and never released into general circulation.

The Denver issue demonstrates very comparable market behavior. Most specimens naturally grade SP68–SP69 with a Full Bands designation due to the controlled striking conditions. Current market examples trade in the $16–$34 range for uncirculated coins, while certified specimens span a broader $2–$26 range based on exact technical grade.

An SP69-graded example brought $35 in November 2020. The value proposition here is straightforward: collectors appreciate the distinctive satin finish and limited production, but a consistent supply of high-quality survivors prevents any meaningful scarcity premium from developing.

Historical auction performance is detailed in the Auction Record Chart below.

Also Read: 16 Rare Dime Errors List with Pictures (By Year)

 

Rare 2006 Dime Error List — Errors That Add Real Value

While most 2006 Roosevelt dimes are ordinary circulation coins, mint errors transform them into valuable collectibles. These production anomalies occur when dies misalign, strike multiple times, or interact unexpectedly with planchets during the minting process.

Error coins from 2006 remain relatively scarce compared to the billions of normal strikes produced that year.

1. Off-Center Strike Error

An off-center strike happens when the planchet fails to align properly with the dies, causing the design to appear shifted toward one edge with a blank crescent on the opposite side.

The percentage of off-center displacement determines value — a 30% off-center strike is far more desirable than a 5% shift. At 50% off-center, when the date is still fully visible, values peak.

A 2006-P Roosevelt dime graded MS64 with an obverse off-center strike achieved $730 at Heritage Auctions in 2020. Coins with the date fully visible and greater than 30% displacement are most sought after.

2. Doubled Die Error

A doubled die error occurs during die production — when the hub impresses the working die in slightly misaligned positions, creating overlapping images on inscriptions or design elements.

This is different from “machine doubling,” which has almost no value. True doubled die errors show distinct secondary images with clear separation under magnification. Look carefully at “LIBERTY,” the date, and “IN GOD WE TRUST.”

A 2006-S silver proof Roosevelt dime graded PF-69 with doubled die characteristics realized $1,459 at Heritage Auctions in 2020 — one of the highest prices recorded for any 2006 dime error.

3. Repunched Mint Mark (RPM) Error

A repunched mint mark (RPM) error occurs when the mint mark was stamped onto the die more than once at slightly different positions, leaving visible doubling or overlapping impressions of the “P” or “D.”

The U.S. Mint eliminated manually punched mint marks in 1989 by moving them to the master die. However, older dies still in use near the transition period can show RPM characteristics. Look for a faint ghost image of the mint mark beneath or beside the primary mark.

A 2006-P Roosevelt dime graded MS63 with a repunched mint mark error sold for $945 at GreatCollections in 2022 — a remarkable result for a coin from such a high-mintage year.

4. Missing Clad Layer Error

A missing clad layer error exposes the coin’s copper core on one or both sides. The 2006 dime is a three-layer coin — a copper core sandwiched between two nickel-copper alloy layers. When the bonding process fails before striking, one clad layer separates, leaving the reddish copper core exposed.

You can confirm this error by weight: a dime missing one clad layer weighs approximately 1.8 grams instead of the standard 2.268 grams. The edge will also show only two layers when examined closely.

A 2006-D Roosevelt dime graded MS64 with a missing obverse clad layer sold for $867 at Heritage Auctions in 2023. Missing clad layer errors affecting both sides can exceed $1,000 at auction.

5. Strike-Through Error

A strike-through error occurs when a foreign object — grease, cloth, wire, or debris — gets between the die and the planchet during striking. The object leaves its impression on the coin’s surface where the design should be sharp and clear.

Grease-filled strike-throughs create soft, mushy-looking areas or blank spots in the design. More exotic impressions from wire or cloth threads command the highest premiums.

A 2006-P Roosevelt dime graded MS64 with a strike-through error on the obverse brought $810 at Heritage Auctions in 2022.

6. Collar Clash Error

A collar clash error develops when the striking die contacts the retaining collar instead of the planchet, transferring the collar’s reeded pattern onto the coin’s surface near the rim.

This appears as unusual serrations or reeding marks extending inward from the rim onto the coin’s field. It requires careful rim examination, as subtle examples can be missed without proper lighting and a loupe (magnifying glass).

A 2006-D dime graded MS65 with collar clash characteristics sold for $560 on eBay in 2021, indicating solid collector interest despite the error’s subtlety.

Check out now: Best Places To Sell Coins Online (Pros & Cons) 

 

Where To Sell Your 2006 Dime?

Understanding your 2006 Dime’s value is only the first step — the next question is where to convert that knowledge into a sale. Below, you’ll find a curated selection of online selling platforms, complete with detailed overviews, advantages, and limitations.

 

FAQ About The 2006 Dime Value

1. How much is a 2006 dime worth?

Most circulated 2006 dimes are worth face value — 10 cents. Uncirculated examples from Philadelphia or Denver typically range from $1.50 to $8 depending on exact grade, with MS65 examples around $7–$8.

Proof dimes sell for $4–$15, while silver proofs range from $7–$12. Satin Finish special strikes from mint sets trade between $5–$35. The most valuable are high-grade Full Bands specimens or confirmed error coins, which can reach hundreds or even thousands of dollars at auction.

2. What makes a 2006 dime valuable?

Striking variety matters most — proof coins, silver proofs, and Satin Finish special strikes are worth more than regular circulation coins. Grade is the next factor: scarcity increases sharply at MS67 and above.

The Full Bands (FB) designation — meaning complete, unbroken separation of the torch’s horizontal bands — can double or triple value at any grade level. Certified mint errors, including off-center strikes, doubled dies, RPMs, and missing clad layers, are the most valuable category of all.

3. What does Full Bands mean on a 2006 dime?

Full Bands (FB) is a strike-quality designation from PCGS indicating that the horizontal bands wrapping the torch on the reverse are fully separated — no breaks, merges, or weak areas anywhere across their width.

These bands are the highest points of the reverse die and wear down fastest as dies age. NGC uses a stricter designation called Full Torch (FT), which additionally requires the vertical lines of the torch to be defined. An FB example at any grade level typically sells for 2–5 times more than the same grade without the designation.

4. Is a 2006-S silver proof dime made of real silver?

Yes. The 2006-S Silver Proof Dime is struck in 90% silver and 10% copper, containing 0.0723 troy ounces of silver. At current silver spot prices, this gives the coin a meaningful intrinsic metal value as a floor.

The U.S. Mint resumed issuing silver proof dimes in 1992 — any silver proof Roosevelt dime dated 1992 or later is a modern collector issue. The clad proof version looks similar but contains no silver and is worth slightly less.

5. What is a Satin Finish dime and why is it special?

Satin Finish dimes were produced by the U.S. Mint exclusively from 2005 through 2010. They were struck using burnished blanks and specially prepared dies, creating a soft, non-reflective surface texture that sits between a circulation strike and a proof.

Grading services label these with the “SP” (Specimen) prefix. They were only available in annual Uncirculated Mint Sets at $16.95 per set in 2006, never released into circulation. The Philadelphia and Denver versions each had a mintage of 847,361 — modest by modern standards, which is one reason high-grade examples can command reasonable premiums.

6. What is the most valuable 2006 dime ever sold?

The highest recorded sale is $4,406 for a 2006-D Satin Finish example, though this result at MS61 — a relatively low grade — is considered anomalous and likely reflects unusual bidding circumstances or an unrecorded error feature. The highest confirmed sale for a standard 2006-D MS68 is $282 (Heritage Auctions, December 2014).

For error coins, the record stands at $1,459 for a 2006-S silver proof dime with a doubled die error (Heritage Auctions, 2020). An off-center strike on a 2006-P MS64 brought $730 at the same house in 2020.

7. How do I tell if my 2006 dime has a missing clad layer error?

A missing clad layer error is identified by a reddish-copper color on the affected side of the coin instead of the normal silver appearance. The copper core is exposed where the outer nickel-copper layer failed to bond properly.

Confirm the error by weighing the coin: a standard 2006 dime weighs 2.268 grams; a coin missing one clad layer weighs approximately 1.8 grams. Examine the edge — you should see only two layers instead of three. Be cautious of coins that have been plated or chemically treated post-mint, which can mimic this appearance.

8. How does PCGS grade differ from NGC for Roosevelt dimes?

Both PCGS and NGC use the standard 70-point Sheldon grading scale, and their numeric grades are generally equivalent. The key difference lies in the strike designation: PCGS uses “Full Bands” (FB) requiring complete separation of the upper and lower horizontal bands on the torch, while NGC uses the stricter “Full Torch” (FT) designation that also requires the vertical lines of the torch to be well defined.

This means a coin that earns FB from PCGS might not earn FT from NGC. In practice, PCGS FB examples sometimes carry a slight premium (around 5–10%) over NGC FT examples due to perceived stricter standards, though both designations are fully accepted by the market.

9. Are 2006 proof dimes a good investment?

Generally speaking, 2006 proof dimes are accessible collectibles rather than investment vehicles. Both the clad and silver proof versions have mintages in the millions, most examples achieve the top grades easily, and retail prices in the $4–$15 range leave little room for significant appreciation.

The silver proof does carry an intrinsic silver value as a price floor. For investment-oriented collectors, error coins and very high-grade Full Bands circulation strikes offer better potential, since those involve genuine scarcity at the top of the grade range.

10. Where can I sell a valuable 2006 dime?

For common examples worth under $25, eBay provides the broadest audience and lowest barrier to entry. For certified high-grade coins or confirmed errors worth $100 or more, major auction platforms like Heritage Auctions, Stack’s Bowers, and GreatCollections are the best venues — they reach serious collectors nationally and internationally.

Always have unusual examples authenticated and graded by PCGS or NGC before selling, as a certified holder dramatically increases buyer confidence and typically results in higher realized prices. The CoinValueChecker App can give you an instant preliminary assessment before you decide whether professional grading is worth the cost.