1992 Dime Value (Errors List, “P”, “D” & “S” Mint Mark Worth)

Most 1992 Roosevelt Dimes circulating today are worth just face value, but understanding the 1992 Dime value spectrum reveals opportunities worth your attention.

While a typical worn example trades for around $0.31, the gap between common circulation strikes and premium specimens tells a different story. A standard 1992-P dime in mint state reaches $6.86, but add Full Bands designation to that same coin and the value jumps to $42.49—nearly six times higher.

This guide breaks down exactly what drives these values, which varieties deserve your focus, and how to identify specimens worth more than a quick glance.

 

1992 Dime Value By Variety

The 1992 Roosevelt Dime was minted at Philadelphia (P) and Denver (D) for circulation, along with special proof versions from San Francisco (S), including both standard clad and 90% silver compositions.

If you know the grade of your coin, you can find the exact price below in the Value Guides section.

Also Read: Roosevelt Dime Value (1946-Present)

 

Top 10 Most Valuable 1992 Dime Worth Money

This chart reveals dramatic value disparities among 1992 Roosevelt Dimes based on mint marks and grades. The top two entries, both Philadelphia mint (P) coins graded 61 and 68, command $1,610 and $1,440 respectively—values that dwarf all others.

A sharp cliff appears after the second position. The third-ranked 1992-S Silver PR 70 drops to just $564, less than 40% of the second-place value. This suggests the top two represent exceptionally rare varieties, likely Full Bands specimens that command massive premiums.

Denver mint (D) coins occupy the bottom tier, with two 1992-D 68 examples valued at only $223 and $192. This 8-fold gap between identically graded Philadelphia and Denver coins highlights how mint origin dramatically affects collectible value beyond simple condition metrics.

 

History Of The 1992 Dime

The Roosevelt dime was introduced in 1946 to honor President Franklin D. Roosevelt following his death in 1945. The design replaced the Mercury dime and has remained largely unchanged for decades, featuring Roosevelt’s profile on the obverse and a torch flanked by olive and oak branches on the reverse, symbolizing liberty, peace, and strength.

By 1992, the Roosevelt dime had served American commerce for 46 years, becoming one of the most familiar coins in circulation. This particular year marked a period of economic transition for the United States, as the nation grappled with recession and unemployment rates that had climbed above 7 percent.

The presidential election between incumbent George H.W. Bush and challenger Bill Clinton centered heavily on economic concerns, making the purchasing power of every dime particularly meaningful to American families.

The 1992 dime circulated during the aftermath of the Cold War’s end, as Americans adjusted to a new global order. While the coin’s design remained unchanged, it continued to embody Roosevelt’s enduring legacy during another era of economic challenge, reminding citizens of the New Deal president who had guided the nation through the Great Depression six decades earlier.

Also Read: Top 100 Most Valuable Roosevelt Dimes Worth Money List

 

Is Your 1992 Dime Rare?

Want to know how rare your 1992 dime really is? Use our CoinValueChecker App to instantly check its rarity grade and discover if you have a hidden treasure in your pocket change. Download now for free expert assessments!

 

Key Features Of The 1992 Dime

Understanding the key features of the 1992 dime is essential for collectors, whether you’re authenticating a coin’s legitimacy, determining its condition and grade, or identifying potential varieties and errors that could significantly affect its value.

By examining the obverse, reverse, and physical specifications in detail, collectors can better appreciate the craftsmanship that goes into these everyday coins and make informed decisions when building their collections or assessing what they already own.

The Obverse Of The 1992 Dime

The obverse of the 1992 Roosevelt dime features a left-facing profile portrait of President Franklin D. Roosevelt, conveying dignity and strength through its clean, classical design.

The word “LIBERTY” appears along the upper rim in front of Roosevelt’s face, while “IN GOD WE TRUST” is positioned in smaller letters below the chin.

The date “1992” is located at the lower right portion of the coin. The mint mark is located below the date on the obverse. Designer John R. Sinnock’s initials “JS” are subtly placed just below the neckline truncation.

The Reverse Of The 1992 Dime

The reverse shows a torch in the center, representing liberty, flanked by an olive sprig representing peace on the left, and one of oak symbolizing strength and independence on the right. The torch appears lit with a flowing flame extending upward from its top.

The inscription “E PLURIBUS UNUM” (out of many, one) stretches across the field, positioned above the torch and between the two branches.

The outer rim carries the legends “UNITED STATES OF AMERICA” along the top curve and “ONE DIME” along the bottom, clearly identifying both the country of origin and the coin’s denomination.

Other Features Of The 1992 Dime

The 1992 dime measures 17.90 millimeters in diameter, making it one of the smallest coins in regular U.S. circulation. The coin has a thickness of 1.52 millimeters, giving it a relatively thin profile that fits easily into coin slots and vending machines.

Standard circulation strikes weigh 2.27 grams, while the composition consists of 75% copper and 25% nickel over a pure copper center, creating what’s known as a “clad” coin that replaced the earlier silver versions.

The edge is reeded, featuring fine grooves that run perpendicular to the coin’s faces, which both aids in grip and helps prevent counterfeiting.

Also Read: Top 100 Rarest Dimes Worth Money (Most Expensive)

 

1992 Dime Mintage & Survival Data     

The mintage data reveals a dramatic contrast between circulation strikes and collector issues. Denver struck approximately 616 million pieces, slightly edging out Philadelphia’s 594 million for everyday commerce. This pattern reflects Denver’s high production capacity, as the facility ranks among the world’s largest coin producers.

San Francisco focused exclusively on limited proof production with roughly 2.9 million clad proofs and 1.3 million silver proofs for collectors.

Proof coins purchased by collectors were preserved from the moment of release. The San Francisco clad proofs achieved an exceptional 95% survival rate, with over 2.7 million documented survivors. This reflects careful storage in protective holders rather than circulation wear.

In contrast, circulation strikes from Philadelphia and Denver lack survival documentation. Business strike coins typically experience significant attrition through everyday use and losses over decades, making precise survival estimates difficult to establish. Despite over 1.2 billion pieces minted, tracking becomes impossible once coins enter commerce.

Also Read: Top 70+ Most Valuable Mercury Dimes Worth Money (Chart By Year)

 

The Easy Way to Know Your 1992 Dime Value

Figuring out what your 1992 dime is actually worth can feel overwhelming. You’re trying to spot tiny mint marks, determine the grade, identify possible errors, and then cross-reference all that information with current market prices. It’s a lot to juggle, especially when one small detail can make a huge difference in value.

That’s where CoinValueChecker App comes in. Just snap a photo of your coin, and the app instantly identifies the variety, assesses the condition, and gives you an accurate current market value—all in seconds. No guesswork, no endless research, just straightforward answers when you need them.

 

1992 Dime Value Guides

The 1992 Roosevelt dime was produced in four distinct varieties, each serving different purposes in American coinage.

In 1992, the Mint introduced a new Silver Proof Set that marked the return of silver dimes for collectors, creating a historically significant year for the series.

Philadelphia and Denver facilities struck massive quantities of circulation dimes for everyday commerce, while San Francisco produced two specialized proof varieties exclusively for collectors.

Understanding these different types is essential for collectors, as each variety has its own characteristics, mintage figures, and market values that can vary significantly from one another.，

• 1992-P Dime – Philadelphia Mint circulation strike with “P” mint mark, produced for everyday use.
• 1992-D Dime – Denver Mint circulation strike with “D” mint mark, highest mintage of the year.
• 1992-S DCAM Dime – San Francisco proof strike in copper-nickel clad composition with Deep Cameo finish.
• 1992-S Silver DCAM Dime – San Francisco proof strike in 90% silver composition with Deep Cameo finish, marking the first year of modern silver proof dimes.

 

1992-P Dime Value

The 1992-P Roosevelt Dime is fairly easy to obtain due to the Mint’s very large production of 593.5 million pieces. However, the coin becomes hard to find only in MS68 condition or higher. The most distinctive feature of this variety is the Full Bands designation, which dramatically transforms its collectibility.

With the Full Bands designation it is much different, as they are scarce in any condition, with few examples graded overall with Full Bands characteristics.

According to market data, standard circulation strikes in typical mint state grades remain affordable at just a few dollars, while MS68 specimens have reached $350 at auction. The Full Bands variety commands exceptional premiums, with an MS61 Full Bands example achieving $1,610 at Heritage Auctions in January 2012.

This significant price differential demonstrates how strike quality can elevate even a common-date modern dime into a serious collectible.

The historical auction records below illustrate the price progression for different grades and designations of this variety over time.

Market activity data reveals ongoing collector interest and trading patterns for the 1992-P dime across various quality levels.

 

1992-D Dime Value

With over 616 million pieces struck, the 1992-D represents Denver’s highest production run that year and remains readily available in most grades. Most collectors can pick up a nice uncirculated example for just a couple of dollars, making it an affordable date to complete a set.

However, value increases substantially at higher grade levels. MS68 specimens have reached $192 at auction, demonstrating how condition rarity affects even common-date modern dimes.

Strike quality adds another dimension to value—the torch bands on most 1992-D dimes show varying degrees of weakness due to high-speed production. Coins displaying sharp, complete separation across all torch bands are considerably scarcer and attract premium interest from specialists.

An MS67 Full Bands example sold for $449 on eBay in August 2020, while standard MS67 coins without the Full Bands designation trade for significantly less.

Auction results across different grades show how collectors value strike quality and preservation for this Denver issue.

Recent market activity reflects steady collector demand for quality examples, particularly those with Full Bands characteristics.

 

1992-S DCAM Dime Value

With nearly 2.9 million pieces struck at San Francisco, this isn’t a rare coin by any measure, but that’s precisely what makes it practical for collectors building complete proof sets or studying San Francisco’s production quality from this era.

Most examples grade PR69 DCAM and trade in the $5-15 range depending on market conditions—reasonable for a collector-quality modern proof.

The PR70 DCAM tier is more selective, with an auction record of $299 achieved at Heritage Auctions in May 2003, though current market prices for perfect specimens typically settle lower as more examples have been certified over the years.

What makes this coin worth considering isn’t rarity or dramatic upside potential, but rather its role as an affordable, attractive proof that demonstrates San Francisco’s technical proficiency during the early 1990s. For type collectors or those assembling date runs, it fills its slot efficiently without requiring a significant investment.

Historical auction data shows how PR70 specimens have performed relative to lower grades over time.

Market activity reveal consistent but modest collector activity for this accessible San Francisco proof issue.

 

1992-S Silver DCAM Dime Value

The 1992-S Silver Deep Cameo Roosevelt Dime has a mintage of over one million pieces. This production volume means it is not a rare coin. Most surviving coins are graded in the PR63 to PR68 range. The coin only begins to show some collecting difficulty at the PR69 grade level.

However, even at that level, market prices remain just slightly above the silver spot value premium. The real focus is on the PR70 perfect grade. PCGS has now graded over 1,500 pieces at this level. This supply was relatively scarce in the early years.

Back then, it achieved an auction record of $564 at a Heritage Auctions sale in May 2004. However, as the number of submissions continued to grow, the market supply and demand dynamics changed significantly.

In recent years, PR69 grade examples typically trade in the $6 to $10 range. Even PR70 grade pieces only reach $10 to $30. This price decline reflects the collecting market’s repositioning of early silver proof coin series.

The current market pricing for this variety is quite rational. Collectors tend to view it as part of a series collection rather than as a standalone investment piece.

To understand this coin’s historical auction performance, you can refer to the Auction Record Chart below.

In terms of market activity, this variety maintains steady trading frequency in the secondary market.

Also Read: 16 Rare Dime Errors List with Pictures (By Year)

 

Rare 1992 Dime Error List

With billions of Roosevelt dimes produced in 1992, error coins emerged as an inevitable byproduct of high-volume production. These minting mistakes transform ordinary ten-cent pieces into collectible varieties that command significant premiums above face value.

Error coins can be astronomically more valuable than their face value, with unique examples selling for hundreds of dollars. Understanding the characteristics, formation causes, and market dynamics of these errors helps collectors identify potentially valuable specimens in circulation or dealer inventories.

1. Off-Center Strike Error

Off-center strike errors occur when the coin’s design fails to align properly during striking, resulting in misshapen coins that show areas of blank planchet. This happens when the planchet shifts position between the dies before impact.

The error’s visibility varies dramatically—minor misalignments of 5-10% may show slight design displacement, while dramatic 50%+ shifts create crescents of blank metal alongside compressed imagery.

Values depend on the degree of the off-center strike but can reach $10-$20 per coin. Collector demand focuses on specimens with dates and mintmarks still visible, as authentication requires these identifiers. The 1992 examples remain accessible to budget-conscious collectors.

2. Die Break/Die Crack Error

Die breaks occur when striking die fragments physically detach during production due to metal fatigue and stress fractures from repeated use. When the die breaks, it forms cracks which are engraved on the planchet, creating unusual but small lines on the coin’s surface.

The most recognizable form is the “cud”—a marginal die break appearing as a raised blob typically adjacent to the rim. Minor die cracks resembling hair-thin scratches add modest premiums of $2-5, while major cuds affecting significant design portions can command $15-30.

Value correlates directly with the size and dramatic nature of the break, with larger examples commanding higher premiums. These errors become progressively more common as dies near retirement.

3. Double Struck Error

The 1992-D Roosevelt Dime double struck error is an attractive variety where the coin was struck twice, causing the design to overlap. This dramatic error occurs when a struck coin fails to eject from the press and receives a second impression, either perfectly aligned (creating strengthened details) or rotated (showing ghosted doubling).

The visibility ranges from subtle to spectacular depending on the rotation degree between strikes.

It is a unique and attractive coin that is very popular among collectors, with an example graded MS-63 selling for $18,000 in 2023. This represents the premium tier of 1992 Roosevelt dime errors, though most double strikes trade for $50-200 depending on dramatic effect and grade.

 

Where To Sell Your 1992 Dime?

Ready to turn your 1992 Dime into cash? Finding the right selling platform makes all the difference. Below you’ll find a curated list of reliable online marketplaces, complete with what makes each one stand out and what to watch out for.

Check out now: Best Places To Sell Coins Online (Pros & Cons) 

 

1992 Dime Market Trend

*Market Trend Chart showing the number of people paying attention to this coin.

 

FAQ About The 1992 Dime         

1. How much is a 1992 Dime worth?

A standard 1992 Roosevelt Dime in circulated condition is worth between $0.15 and $0.35, just slightly above face value. However, uncirculated specimens command higher premiums depending on grade and mint mark.

The 1992-S proof dime is more expensive compared to its standard counterparts, with values starting around $7.19 or more in uncirculated condition. The 1992-S Silver Proof Dime has a mintage of well over 1 million pieces, making it relatively accessible.

High-grade examples, particularly those certified PR69 or PR70 DCAM, can reach $10-30 depending on market conditions. Error coins represent the highest value potential, with certain varieties selling for hundreds or even thousands of dollars at auction.

2. How can I tell if my 1992 Dime is silver?

In 1992, the Mint introduced a new Silver Proof Set that contained an example of each coin in circulation. Three coins were composed of 90% silver which included the Roosevelt Dime, Washington Quarter and the Kennedy Half Dollar.

Silver dimes have a distinctive appearance—they lack the copper-colored edge visible on clad coins. When viewing the edge, silver dimes show uniform silver color throughout, while clad versions display a copper core sandwiched between outer layers.

Silver dimes also produce a different sound when dropped, creating a higher-pitched “ring” compared to the duller “clink” of clad coins. Additionally, all 1992 silver dimes bear the “S” mint mark and came exclusively in proof sets, never released for general circulation.

3. Where can I find 1992 Dimes?

The Denver Mint produced more than 616 million dimes in 1992, while the Philadelphia Mint struck 593,500,000 pieces, making circulation strikes extremely common in everyday change. Check coin rolls from banks, examine your pocket change, or search through coin star reject trays at grocery stores.

Silver proof versions require purchasing from coin dealers, online marketplaces like eBay, or numismatic auction houses since they were never released for circulation. Estate sales and inherited coin collections often contain proof sets from this era.

For error varieties, systematic searching through large quantities of circulation strikes offers the best discovery opportunities, though patience is essential given the billions of normal specimens produced. Professional coin dealers and online venues provide access to authenticated error examples.