1929 Quarter Value Checker: Errors List, “D”, “S” & No Mint Mark Worth

1929 Quarter value ranges from $0.25 face value to $72,000. That record was set by a Grade 67 example sold at Heritage Auctions in August 2024. If you’re wondering what yours might be worth, upload your coin photo below for a quick value range. You can also scroll down to browse recent eBay sales and see real prices from actual buyers.

 

1929 Quarter Value By Variety

Three mints struck the 1929 quarter — Philadelphia, Denver, and San Francisco. Each comes in standard and Full Head (FH) versions, and values shift a lot depending on mint mark and strike quality.

If you know the grade of your coin, you can find the exact price below in the Value Guides section.

Also Read: Top 10 Most Valuable Quarter Coins In Circulation Worth Money (With Pictures)

 

Top 10 Most Valuable 1929 Quarter Worth Money

The king of the 1929 quarter world is a Philadelphia MS67 that hammered for $72,000 — blowing past everything else in the series. That coin had it all: no mint mark, a razor-sharp Full Head strike, and a grade almost nobody reaches with Standing Liberty quarters.

Denver brought the heat too. A 1929-D graded MS66 sold for $58,800, landing second overall. Another 1929-D at MS67 pulled $16,450. Denver coins at those grades are tough to find, and collectors fight hard for them. San Francisco’s best showing was a 1929-S MS68 at $31,200 — third highest. An MS68 Standing Liberty quarter from any date is a near-miracle, so that price makes sense.

 

History Of The 1929 Quarter

By 1929, the Standing Liberty Quarter was winding down. Hermon MacNeil’s design had been in production since 1916, and it had already gone through two major changes — a modesty redesign in 1917 and a recessed date fix in 1925 to stop the year from wearing off in pocket change.

The 1929 issue is a high-mintage, late-series coin. Plenty of well-struck Mint State examples survived. But here’s the fun detail: this was the second-to-last year for the entire design. No quarters were struck in 1931 because of the Depression, and by 1932 the Washington quarter had taken over for good.

That makes the 1929 one of the last Standing Liberty quarters you’ll ever find — a final chapter for one of the shortest-lived designs in U.S. coinage history.

Also Read: Top 100 Most Valuable Modern Quarters Worth Money List (1965-Present) 

 

Is Your 1929 Quarter Rare?

Here’s what might surprise you: the Philadelphia coin had the biggest mintage by far, yet it shows the lowest survival rate of the three. All those millions of coins got spent, lost, and melted. Meanwhile, the low-mintage Denver issue actually has the highest survival rate percentage-wise. Fewer were made, but proportionally more were saved. The Full Head versions across all three mints are a completely different kind of rare — especially the 1929-D FH, where maybe 2% of the entire mintage got a decent strike.

Want to know where your coin stands? Check it with our Coin Identifier and Value App for an instant rarity assessment.

 

Key Features Of The 1929 Quarter

The 1929 quarter is a Type 2 Standing Liberty issue — the final version of the design. Knowing what to look for helps you grade it accurately and spot the details that drive value.

The Obverse Of The 1929 Quarter

Liberty stands in a gateway, holding a shield in one hand and an olive branch in the other, wearing chain mail armor. LIBERTY arcs across the top, and IN GOD WE TRVST is split across the two wall sections on either side of her. Count the stars along the gateway edges — seven on the left, six on the right, thirteen total.

Look below Liberty’s feet. The date sits on a recessed step — that’s the 1925 fix that kept the year from wearing flat. The designer’s initial “M” is tucked to the right of the bottom star on the right column.

The Reverse Of The 1929 Quarter

Flip it over and you’ll see an eagle in full flight, heading right with wings outstretched and raised. Three stars sit below the eagle, five on each side — that star arrangement came with the Type 2 redesign in 1917.

UNITED STATES OF AMERICA and QUARTER DOLLAR arc around the rim. E PLURIBUS UNUM runs above the eagle.

Other Features Of The 1929 Quarter

The 1929 quarter measures 24.3mm in diameter and weighs 6.25 grams, struck in 90% silver and 10% copper. The edge is reeded. Look for the mint mark on the obverse, to the left of the date.

Also Read: Top 30 Most Valuable State Quarter Coins Worth Money List

 

1929 Quarter Mintage & Survival Data

Philadelphia dominated production at 11,140,000 coins. San Francisco made 1,764,000, and Denver trailed at just 1,358,000 — roughly one-eighth of Philly’s output.

Here’s the twist: about 10,000 coins survive from each variety. That means Denver’s survival rate is 0.7364%, San Francisco’s is 0.5669%, and Philadelphia’s is just 0.0898%. Think about that — for every thousand Philadelphia quarters minted, fewer than one survived. Those millions of Philly coins got spent into oblivion.

A higher survival rate doesn’t always mean easier to find, though. It just tells you how well a smaller original batch held up over time.

Also Read: Top 20 Most Valuable Bicentennial Quarter Worth Money List

 

The Easy Way to Know Your 1929 Quarter Value

Your coin’s value comes down to three things: mint mark, strike quality, and condition. This guide gives you a solid starting point, but nailing the exact number takes a closer look.

Full Head designations and market shifts can swing prices hard. Instead of guessing, use our Coin Identifier and Value App — plug in your coin’s details and get a current value estimate right away.

 

1929 Quarter Value Guides

Here’s a quick breakdown of what makes each 1929 variety different before you dive into the price charts.

1929 No Mint Mark Quarter — Struck at the Philadelphia Mint, this is the most abundant variety of the year, with a mintage of over 11 million. It is among the most frequently encountered issues in the Standing Liberty series for Full Head strikes, making it a popular choice for type set collectors.

1929-D Quarter — The 1929-D represents the last Standing Liberty quarter ever struck at the Denver Mint, as Denver did not contribute to production in the series’ final year of 1930. Full Head examples are considered an overlooked rarity, with only an estimated 2% of the mintage believed to have been struck with such detail.

1929-S Quarter — The 1929-S is praised for its sharper and more consistent strike compared to other mint marks, making Full Head examples more attainable than with the Denver issue. With a mintage of just 1,764,000, it remains a popular choice among collectors pursuing a complete Standing Liberty set.

The Philadelphia coin is the easiest entry point. Denver and San Francisco attract more advanced collectors chasing well-struck, high-grade pieces. I think the 1929-D Full Head is the sleeper of the group — seriously underappreciated for how tough it is.

 

1929 No Mint Mark Quarter Value

Over half the certified Mint State population of this coin carries the Full Head designation. That’s a remarkably strong ratio compared to most Standing Liberty dates, and it makes the Philly issue the second-most-common FH coin in the entire series.

With a mintage of 11,140,000, this is the workhorse of the 1929 lineup. Plenty of Gem Mint State coins survived, so you won’t struggle to find one raw or slabbed in mid-grades. But push into MS67 territory and the game changes fast.

The auction record sits at $72,000, set by an MS67+FH example at Heritage Auctions in August 2024.

Historical auction results across platforms and grade levels are shown below — prices jump sharply from MS65 onward, and Full Head coins pull a clear premium at every tier.

Trading volume over the past year has been steady, with occasional spikes that show consistent collector demand.

 

1929-D Quarter Value

Did you know this is the last Standing Liberty quarter Denver ever struck? The mint sat out 1930 entirely, making the 1929-D the end of the line for Denver’s run with this design.

Mintage was just 1,358,000 — the lowest of the three 1929 varieties. Denver’s dies ran weak during the 1920s, and only about 2% of the mintage got a proper Full Head strike. At the Gem level, we’re probably talking fewer than 100 FH coins available to collectors. That’s a tiny pool.

The FH auction record is $58,800, from an MS66+FH example at Heritage Auctions in August 2021. If you’ve got a sharp 1929-D, it’s worth a very close look.

Below are historical auction results by platform and grade — Full Head examples get expensive in a hurry, especially at MS65 and above.

Market activity has been moderate but consistent over the past year, with demand focused on high-grade and Full Head slabbed pieces.

 

1929-S Quarter Value

If you’re looking for the best-struck 1929 quarter, this is it. The San Francisco Mint outdid itself — the 1929-S came off the press sharper and more consistent than any other S-mint Standing Liberty quarter from the entire decade.

Mintage was 1,764,000, slotting between Philly and Denver. Full Head examples are more attainable here than on the Denver issue, which makes this a go-to coin for collectors who want a well-struck representative without paying 1929-D FH prices.

The auction record is $31,200, achieved by an MS68 example at Heritage Auctions in January 2020. MS68 on a Standing Liberty quarter is almost unheard of. That grade alone explains the price.

Auction results by platform and grade are shown below — prices climb noticeably at MS66 and above, with that MS68 result standing way apart from everything else.

This variety trades with reasonable regularity. It has a solid reputation as the most approachable high-grade option among the three 1929 issues.

Also Read: 22 Rare Quarter Errors List with Pictures (By Year)

 

Rare 1929 Quarter Error List

Errors on 1929 Standing Liberty quarters are genuinely scarce. This isn’t like modern coinage where new varieties pop up constantly. The documented die varieties from this era are few and well-studied, so when an authenticated example surfaces, specialists pay attention.

1. 1929-S Obverse Die Clash FS-401

This is a fun one to cherrypick. A die clash happens when the obverse and reverse dies smack into each other with no planchet between them, leaving ghost impressions on both sides.

On the 1929-S FS-401, here’s what to look for: a clashed “E” — the first letter of E Pluribus Unum from the reverse — shows up near Liberty’s left leg. Near her right leg, you’ll spot an inverted “M” from United States of America that reads as a “W.” On heavily clashed examples, check above the eagle’s wings on the reverse for a bar transferred from the obverse gateway.

This variety is listed in the Cherrypickers’ Guide and commands a premium of approximately 30 to 50% over a standard 1929-S. Certified examples are scarce. Grab a loupe and take your time — this one rewards patience.

 

Where To Sell Your 1929 Quarter?

Ready to sell your 1929 quarter? We’ve put together a curated list of the best platforms for selling coins online — covering auction houses, dealer networks, and collector marketplaces — so you can find the right buyer and get the best value for your coin.

Check out now: Best Places To Sell Coins Online (Pros & Cons)  

 

1929 Quarter Market Trend

*Market Trend Chart showing the number of people paying attention to this coin.

 

FAQ About The 1929 Quarter

1. What is the 1929 Quarter Value in circulated condition?

In Good condition, expect around $15–$41 depending on mint mark. Philadelphia is the cheapest; Denver and San Francisco carry a small premium. In About Uncirculated, you’re looking at $111 to $445 across all three varieties.

2. How do I know which mint struck my 1929 quarter?

Check the obverse, just left of the date. A “D” means Denver. An “S” means San Francisco. No letter? That’s Philadelphia — Philly never used a mint mark on Standing Liberty quarters.

3. What does Full Head (FH) mean, and why does it matter?

The Full Head designation means Liberty’s head shows complete strike detail — all three leaves, a sharp hairline, and a visible ear. These features sit at the highest point of the design and come out weak on most coins, even uncirculated ones.

A Full Head coin can be worth several times more than a standard example at the same grade.

4. Which 1929 quarter variety is the most valuable?

The Philadelphia No Mint Mark holds the record: an MS67+FH brought $72,000 at Heritage Auctions in August 2024.

That said, the 1929-D Full Head is the hardest to find well-struck. I’d argue it’s the most desirable variety among advanced collectors, even if it hasn’t topped the price charts yet.

5. Is the 1929-D quarter rare?

Yes. Lowest mintage of the three at 1,358,000. Last Standing Liberty quarter from Denver. Only about 2% got a Full Head strike, and fewer than 100 Gem-level FH examples are thought to survive. That’s a genuine strike and condition rarity.

6. Why is the 1929-S quarter considered the best-struck of the three varieties?

San Francisco’s dies were more consistent in 1929 than in any other year of the decade. The detail across Liberty’s head and shield came out sharper and more uniform. Full Head examples are easier to find here than on the Denver issue, which is why collectors gravitate toward it for a well-struck series representative.

7. What is a die clash error, and does the 1929 quarter have one?

A die clash happens when the dies hit each other with no blank in between, leaving ghost impressions. The 1929-S has a documented variety — FS-401 — listed in the Cherrypickers’ Guide. Look for a clashed “E” near Liberty’s left leg and an inverted “M” reading as a “W” near her right leg.

8. How many 1929 quarters are estimated to survive today?

About 10,000 for each variety, despite huge differences in original mintage. The 1929-D has the highest survival rate at 0.7364%, followed by the 1929-S at 0.5669%, and Philadelphia at just 0.0898%. Those Philly coins got circulated hard and most were lost over time.

9. Should I clean my 1929 quarter before selling it?

Never. Cleaning permanently damages the surfaces and tanks the value. Grading services spot cleaned coins immediately, and a cleaned example always grades lower than an original-surface coin in the same condition. Handle by the edges, store in non-PVC holders.

10. How can I find out the exact value of my 1929 quarter?

You need to factor in mint mark, grade, strike quality, and current market conditions. This guide gets you close, but for a precise, up-to-date number, use our Coin Identifier and Value App — it pulls from current market data and gives you an instant estimate.