1927 Dime Value Checker: Errors List, “D”, “S” & No Mint Mark Worth

1927-S Full Band Mercury Dime value ranges from $0.10 face value to $63,250. That record sale was a Grade 67 example sold through Bowers and Merena in April 2008. Upload a photo of yours below for a quick value range based on condition and mint mark. Scroll down to check recent eBay sales and see what collectors are actually paying right now.

 

1927 Dime Value By Variety

Three mints struck the 1927 dime — Philadelphia, Denver, and San Francisco — and each one carries a different average value today.

If you know the grade of your coin, you can find the exact price below in the Value Guides section.

Also Read: Top 70+ Most Valuable Mercury Dimes Worth Money (Chart By Year)

 

Top 10 Most Valuable 1927 Dime Worth Money

The top spot belongs to a 1927-S FB graded MS67, which brought $63,250 — and nothing else from this year comes close. A 1927-D FB 66 follows at $35,075, with a 1927-S FB 66 at $27,025.

What jumps out is how much the Full Bands designation matters. A 1927-S MS 67 without FB sold for $7,500, while a lower-grade 1927-S FB 65 pulled $9,988. The FB coin in a lower grade beat the non-FB coin in a higher grade. That tells you everything.

Non-FB coins barely crack this top tier. If your 1927 dime is slabbed with a Full Bands designation at MS 64 or above, you’re sitting on something genuinely scarce.

 

History Of The 1927 Dime

By 1927, the Mercury Dime was well into its second decade. Adolph Weinman’s winged Liberty design — which the public immediately nicknamed “Mercury” — had been in pockets and cash registers since 1916.

The country was riding high in the Roaring Twenties. Industrial output was booming, consumer confidence was strong, and the mints were cranking out dimes at a healthy clip. All three facilities — Philadelphia, Denver, and San Francisco — struck 1927-dated coins. One fun detail: the winged cap on Liberty was meant to symbolize freedom of thought, but almost nobody called her anything but Mercury. The name stuck from day one and never let go.

Mintages stayed robust through the late 1920s before the Great Depression gutted demand for new coinage after 1930. The 1927 issue sits right in that stable mid-series window — common enough to collect affordably, but old enough to carry real history.

Also Read: Mercury Dime Coin Value (1916-1945)

 

Is Your 1927 Dime Rare?

Here’s what’s counterintuitive: Philadelphia had the biggest mintage by far, yet its survival rate is the lowest of the three. Branch mint coins — the D and S — actually survive in slightly higher numbers, probably because collectors in the 1920s set them aside more often. Still, none of these are easy in high grades. Once you add the Full Bands requirement, all three varieties become a completely different kind of rare. To quickly check where your coin stands, use our Coin Identifier and Value App for an instant rarity assessment.

 

Key Features Of The 1927 Dime

Knowing what to look for on both sides of a 1927 Mercury Dime helps you identify your coin and judge its condition fast.

The Obverse Of The 1927 Dime

Look at the front of your coin. You’ll see Miss Liberty facing left, wearing a Phrygian cap with wings. Those wings symbolize freedom of thought — not the Roman god Mercury, despite the nickname.

LIBERTY curves around her head. IN GOD WE TRUST and the date sit below the portrait. Weinman’s initials are tucked in on the obverse as well.

The Reverse Of The 1927 Dime

Flip it over. The reverse shows a fasces — a bundle of sticks bound together, a Roman symbol of governmental authority — wrapped with an olive branch for peace.

UNITED STATES OF AMERICA and ONE DIME run around the border. The mint mark sits on the reverse. Now look closely at the center horizontal crossband binding the sticks. It’s actually two separate bands. When both bands show full, sharp separation, the coin earns the Full Bands (FB) designation. That’s where the real premium kicks in.

Other Features Of The 1927 Dime

The 1927 dime is composed of 90% silver and 10% copper, with a diameter of 17.9mm and a reeded edge. Philadelphia-struck coins carry no mint mark; Denver and San Francisco coins are marked D and S respectively on the reverse.

Also Read: Top 100 Rarest Dimes Worth Money (Most Expensive)

 

1927 Dime Mintage & Survival Data

Philadelphia cranked out 28,080,000 dimes in 1927 — nearly six times what Denver (4,812,000) or San Francisco (4,770,000) produced.

Yet here’s the twist. Philly’s survival rate is just 0.0178%, with roughly 5,000 coins still around. That means out of every 5,600 dimes struck in Philadelphia, only one survives today. Denver and San Francisco each have about 6,000 survivors, giving them higher survival rates of 0.1247% and 0.1258%.

I think the explanation is simple: collectors in the 1920s paid more attention to branch mint coins and tucked them away. For you as a buyer or seller today, all three varieties are genuinely scarce in high grades — big mintage or not.

Also Read: Top 100 Most Valuable Roosevelt Dimes Worth Money List (Year Chart)

 

The Easy Way to Know Your 1927 Dime Value

Three things drive your 1927 dime’s price: mint mark, grade, and Full Bands status. A worn Philly coin and a gem FB example live in completely different price worlds. The data above shows you exactly how big that gap gets.

The easiest way to get a quick, reliable estimate is to use our Coin Identifier and Value App — just enter your coin’s details and get results instantly.

 

1927 Dime Value Guides

• 1927 No Mint Mark Dime — Struck at the Philadelphia Mint, this is the most common of the three varieties. Philadelphia coins carry no mint mark on the reverse. While circulated examples are relatively easy to find, locating one in a well-preserved or uncirculated state is considerably more difficult, as most surviving coins show significant wear from everyday use.
• 1927-D Dime — Produced at the Denver Mint with a comparatively small mintage. This variety can be difficult to find in the highest Mint State and Full Bands grades, with most examples topping out around MS-66. Its relative scarcity in high grades makes it a strong point of interest for serious collectors.
• 1927-S Dime — The San Francisco issue shares a similarly modest mintage with the Denver variety. The 1927-S is not considered scarce until one reaches Choice or better Mint State grades, at which point well-preserved examples become genuinely hard to source and command meaningful premiums.

The Philadelphia coin is your easiest entry point. Denver and San Francisco reward patience — especially if you’re chasing high-grade or Full Bands pieces. Knowing which variety you have is step one.

  

1927 No Mint Mark Dime Value

With 28,080,000 struck, you’d think top-condition Philly dimes would be everywhere. They’re not. The vast majority of survivors are well-worn circulated coins.

Full Bands examples are where cherrypicking pays off. Most Philadelphia coins just weren’t hit hard enough to produce that clean band separation. Finding one with sharp bands, original luster, and no bag marks is tough.

The auction record for this variety is $15,600, set by an MS67+FB example at Heritage Auctions in January 2019. For a coin from a 28-million mintage year, that price tells you how rarely everything had to go right on a Philly strike.

The chart below tracks how auction results for this variety have shifted over time.

Market activity data suggests how collector interest in this coin has trended month by month.

 

1927 D Dime Value

How much does the mint mark matter? A 1927-D FB 66 sold for $35,075. A Philly coin in the same FB grade hasn’t come close to that number. Denver’s mintage of just 4,812,000 is a fraction of Philadelphia’s output, and it shows in the prices.

Up through MS64, you can find 1927-D examples with or without Full Bands without too much trouble. Above that? The wall hits fast. MS65 FB coins are scarce, and MS66 or better is exceptionally rare. Strike quality at the Denver facility was inconsistent, so high-grade survivors with clean bands are genuinely hard to come by.

That $35,075 record was set by an MS66 FB example at Bowers & Merena in November 2006. It’s held for nearly two decades — which tells you how seldom a top-pop Denver coin surfaces.

The auction chart below shows how sale prices for this variety have moved over the years.

The market activity chart reflects how collector demand for the 1927-D has varied each month.

 

1927 S Dime Value

Think the 1927-S is common? In circulated grades, sure. But fewer than 100 examples have been certified at MS65FB or better. That’s the number that should get your attention.

In lower uncirculated grades, the 1927-S is widely available. The scarcity kicks in hard at MS65 and above. MS66FB coins are genuinely rare, and anything higher almost never appears at auction. The San Francisco Mint’s 4,770,000 mintage is similar to Denver’s, but the FB survival numbers are what really separate this coin.

The non-FB auction record sits at $7,500 for an MS67 example sold at Heritage Auctions in December 2023. Solid demand at the top of the condition scale, and we expect registry set collectors to keep pushing these prices.

The auction chart below illustrates how prices for the 1927-S have trended across recorded sales.

The market activity chart shows how monthly collector interest in the 1927-S has shifted over time.

Also Read: 16 Rare Dime Errors List with Pictures (By Year)

 

Rare 1927 Dime Error List

No errors have been officially attributed specifically to the 1927 date. But Mercury Dimes as a series produced several recurring error types, and any of them could show up on a 1927 coin. Here’s what to watch for when you’re going through a group of raw dimes.

1. 1927 Dime Doubled Die Error

This happens when a die gets a second, slightly off-register impression from the hub. You’ll see doubling on the lettering, date, or Liberty’s profile. Grab a loupe and check the date digits first — that’s where it’s usually easiest to spot. The doubling can be subtle or obvious, and the stronger examples bring real money.

2. 1927 Dime Off-Center Strike Error

When a planchet isn’t seated right between the dies, you get a crescent-shaped blank area on one side. The bigger the miss, the more it’s worth — but only if the date is still fully visible. A 10-15% off-center strike with a readable date is the sweet spot for most error collectors.

3. 1927 Dime Broadstrike Error

The collar die is supposed to contain the metal and form the reeded edge. When it fails, the coin spreads out wider and flatter than normal. You’ll notice the rim is weak or missing entirely. A broadstruck Mercury Dime that also shows Full Bands? That’s a cherrypicker’s dream find.

4. 1927 Dime Die Clash Error

Die clashes happen when the two dies slam together with no planchet in between. Each die picks up a ghost impression of the other’s design. After that, every coin struck by those dies carries faint traces — you might see a hint of the fasces on the obverse, or Liberty’s profile ghosted onto the reverse. Look carefully under good light.

 

Where To Sell Your 1927 Dime?

If you’re ready to sell your 1927 dime, choosing the right platform matters. We’ve put together a detailed guide covering the Best Places to Sell Coins Online — including the pros and cons of each option — so you can make an informed decision with confidence.

Check out now: Best Places To Sell Coins Online (Pros & Cons) 

 

1927 Dime Market Trend

*Market Trend Chart showing the number of people paying attention to this coin.

 

FAQ About The 1927 Dime         

1. What is the 1927 Mercury Dime?

It’s a ten-cent silver coin struck at Philadelphia, Denver, and San Francisco in 1927. The obverse shows Adolph Weinman’s Liberty in a winged Phrygian cap, and the reverse features a fasces wrapped in an olive branch. Composition is 90% silver and 10% copper, with a 17.9mm diameter.

2. How much is a 1927 dime worth?

It depends on mint mark, grade, and Full Bands status. A circulated Philadelphia coin averages around $4.85. A high-grade Denver FB specimen can average over $5,678. The top auction result is $63,250 for a 1927-S FB 67. Condition is the single biggest price driver.

3. What does “Full Bands” mean on a 1927 dime?

Look at the two horizontal bands binding the fasces on the reverse. When both bands show full, sharp separation with no mushiness, the coin earns the FB designation. This requires a precise strike that wasn’t always achieved. FB coins are significantly scarcer and consistently bring higher prices at auction.

4. Which 1927 dime variety is the rarest?

The 1927-D and 1927-S Full Bands examples in high grades. The 1927-S FB in MS65 or better has fewer than 100 certified examples. The two highest individual auction records for this year belong to the 1927-D FB 66 at $35,075 and the 1927-S FB 67 at $63,250.

5. How can I tell which mint struck my 1927 dime?

Flip to the reverse. A “D” means Denver, an “S” means San Francisco. No mint mark? That’s Philadelphia. Look near the base of the fasces on the lower left.

6. Is a 1927 dime made of silver?

Yes — 90% silver, 10% copper, like every Mercury Dime. Even a beat-up example has melt value based on the current silver spot price, which sets a floor on what the coin is worth regardless of grade.

7. What errors can appear on a 1927 dime?

No errors have been officially documented specifically for the 1927 date. But the Mercury Dime series is known for doubled dies, off-center strikes, broadstrikes, and die clashes. Off-center strikes with a visible date and doubled die errors on lettering tend to attract the most collector interest.

8. How many 1927 dimes survive today?

Roughly 5,000 Philadelphia examples, 6,000 Denver, and 6,000 San Francisco. That’s under 0.13% of original mintage for each variety. High-grade and Full Bands survivors are a tiny fraction of even those modest totals.

9. Should I clean my 1927 dime before selling it?

Never. Cleaning removes original surface metal and leaves scratches visible under magnification. Grading services flag cleaned coins as damaged, and they sell for significantly less. Leave your coin as-is until it’s been properly assessed.

10. Where can I find the most accurate value for my 1927 dime?

Look at mint mark, grade, and Full Bands status together. Auction records from Heritage Auctions and Bowers & Merena give you solid benchmarks. For a quick estimate, use our Coin Identifier and Value App to check your coin’s value based on current market data.