1924 Quarter Value Checker: Errors List, “D”, “S” & No Mint Mark Worth

A century after it was struck, the 1924 Standing Liberty Quarter still commands serious attention — and serious money. Three mints produced these coins in 1924: Philadelphia, Denver, and San Francisco, yet most of what survived the decades of circulation is heavily worn, often to the point where the date is barely legible. That scarcity of quality specimens is exactly what drives values up.

A San Francisco Full Head example can fetch nearly $9,557 in MS grade, while even a modest Philadelphia strike in Good condition starts at $21.80 — well above face value.

The 1924 issue also marks the final year of the “raised date” design, before the Mint recessed the numerals in 1925 to prevent them from wearing away — a detail that makes surviving readable examples all the more desirable. If you’re trying to figure out what your coin is actually worth, the full breakdown of 1924 Quarter Value starts below.

 

1924 Quarter Value By Variety

The value of the 1924 Quarter varies depending on its variety and condition. If you know the grade of your coin, you can find the exact price below in the Value Guides section.

Also Read: Top 10 Most Valuable Quarter Coins In Circulation Worth Money (With Pictures)

 

Top 10 Most Valuable 1924 Quarter Worth Money

Grade alone doesn’t determine value — the 1924-S MS66 at $48,000 actually outperformed the MS68 of the same mint by over $12,000. In high-grade numismatics, that kind of inversion usually means one thing: the MS66 was a Full Head strike of exceptional visual impact, while the MS68, though technically superior on paper, may have lacked that same eye appeal. The market bid accordingly.

The Denver mint’s MS67 sitting at $35,250 — nearly identical to the San Francisco MS68 — is another anomaly worth noting. D-mint coins from 1924 are not supposed to compete at that level. When they do, it typically signals a coin so far above the typical D-mint strike quality that collectors treat it as a different animal entirely.

The 1924 series has a ceiling problem for Philadelphia: present throughout, but never the one setting records. The S and D issues absorb most of the serious auction money, leaving Philadelphia quarters as the accessible entry point into the series — competitively priced, but rarely the coin anyone is fighting over in the room.

 

History of The 1924 Quarter

1924 was a transitional moment for the Standing Liberty Quarter. The date had been placed atop a raised step on the obverse since the series began, and by the mid-1920s it was becoming clear that coins were returning from circulation with the date worn completely away. By late 1924, Mint officials decided to recess the date into the design starting the following year — a quiet but consequential fix that makes 1924 the last of the “raised date” era.

That detail matters more than it might seem. The 1924 Philadelphia issue was already among the most poorly produced in the entire series — obverse dies cracked early in production, leaving most surviving mint state examples missing the top portion of their dates. The story was no better at Denver or San Francisco, where weak strikes plagued nearly the entire output, affecting not just Liberty’s head but the shield rivets and eagle feathers as well.

The recessed date modification was among the last acts of the Engraver’s Department under Chief Engraver George Morgan, who died on January 4, 1925. In that sense, 1924 closes out not just a design era but a chapter of the institution itself — struck at the tail end of an era defined by both artistic ambition and mechanical frustration.

Also Read: Top 100 Most Valuable Modern Quarters Worth Money List (1965-Present)

 

Is Your 1924 Quarter Rare?

Wondering if your 1924 Quarter is rare? Use the Coin Value Checker App to find out instantly!

 

Key Features of The 1924 Quarter

The 1924 quarter doesn’t announce itself — the details do.

The Obverse Of The 1924 Quarter

Liberty’s figure is shown standing between the gap in a wall, her shield raised toward the left — toward Europe — while she extends an olive branch in the opposite hand, balancing the imagery of defense with the suggestion of peace. Following a public controversy in 1917 over the original bare-chested depiction, MacNeil clad Liberty in chain mail armor.

Thirteen five-pointed stars flank the gateway wall — seven to the left, six to the right — and the inscription “In God We Trust” runs across the wall itself. The designer’s initial “M” appears to the right of the bottom star in the right column. The date sits on a raised step at Liberty’s feet, exposed and unprotected — a design flaw that would prove costly in circulation and was corrected the very next year.

For collectors, the head is where the real grading work happens. Full Head examples — those with complete helmet leaves, a defined ear hole, and sharp facial detail — command substantial premiums over flat-struck specimens, and attention should also be paid to the rivets on the shield: a coin with both Full Head and full rivets is a true prize.

The Reverse Of The 1924 Quarter

The reverse shows a bald eagle in right-profile relief, wings fully extended as it moves through open air. Thirteen stars are distributed around the eagle — five on each side, three beneath — with “United States of America” arcing above and “Quarter Dollar” below.

Art historian Cornelius Vermeule noted this reverse marked the beginning of the end for naturalistic eagle depictions on U.S. coins — a fitting observation for a design already living on borrowed time.

Other Features Of The 1924 Quarter

The coin measures 24.3mm in diameter and weighs 6.30 grams, struck in a 90% silver, 10% copper alloy with a reeded edge. Mint marks — “D” for Denver, “S” for San Francisco — appear on the obverse just to the left of and slightly above the date. Philadelphia issues carry no mint mark.

Also Read: Top 30 Most Valuable State Quarter Coins Worth Money List

 

1924 Quarter Mintage & Survival Data

Philadelphia struck the most coins in 1924 — by a wide margin — yet ended up with the lowest survival rate of the three mints at just 0.0916%. That’s not a paradox; it’s a predictable outcome. High-mintage coins circulate heavily, wear down faster, and get pulled from commerce without a second thought. Nobody saves what seems abundant.

Denver tells the more interesting story. With roughly 3.1 million struck — less than a third of Philadelphia’s output — it somehow accounts for the largest share of known survivors, at a 0.482% survival rate. That disproportionate retention suggests Denver coins may have seen lighter regional circulation, or were more frequently set aside by collectors who recognized the branch mint premium early.

San Francisco sits at the opposite end: the smallest mintage of the three and a survival rate of 0.1748% — better than Philadelphia, but a fraction of Denver’s. What the raw percentage obscures is the qualitative picture: S-mint survivors are overwhelmingly poorly struck, with full head examples representing a tiny subset of an already thin population. Scarcity of quantity is one thing; scarcity of quality is another problem entirely, and the 1924-S has both.

Also Read: Top 20 Most Valuable Bicentennial Quarter Worth Money List

 

The Easy Way to Know Your 1924 Quarter Value

1924 Quarter Value Guides

1924 No Mint Mark Quarter Value

The Philadelphia issue is the most attainable of the three 1924 varieties in circulated grades, but that accessibility evaporates quickly once you move into Mint State territory. The obverse die cracked early in production, leaving most mint state survivors with the top portion of their dates already compromised straight off the press. A coin with a full, clean date and sharp head detail is not a Philadelphia commonplace — it’s a condition rarity hiding in plain sight.

In terms of price range, circulated examples in Good to Fine condition trade in the $20–$55 range based on the value chart, while MS-grade coins without Full Head designation can reach into the hundreds. The real jump happens at MS66FH and above, where the population thins sharply.

The auction record for the Philadelphia 1924 stands at $33,600, achieved by a PCGS MS67FH example at Heritage Auctions in January 2025 — a result that confirmed what specialists had been saying for years: this issue is a quiet sleeper at the top of the grade scale, and the market is starting to catch up.

The prices Philadelphia 1924 quarters have realized at auction tell a sharper story than any value chart can.

 

1924-D Quarter Value

Denver’s 1924 output is one of the most technically troubled issues in the entire Standing Liberty series. Weak strikes hit Liberty’s head, the date numerals, and the shield rivets all at once — and broken dies meant it was not uncommon to find the top third or half of the date missing on otherwise uncirculated examples. The result is a coin where Mint State survivors are plentiful, but almost none of them meet the Full Head standard.

MS65 and MS66 are considered scarce, with anything finer being a genuine rarity — and Full Head examples at those grades represent a different tier of collecting entirely. The auction record sits at $35,250, set by a PCGS MS67 at Stack’s Bowers in February 2013 — notably, not even a Full Head coin, which speaks to how extreme the condition rarity is at that grade level. A sharply struck 1924-D FH in gem condition is the kind of coin that moves a room.

Every time a sharp 1924-D crosses the block, the room pays attention.

 

1924-S Quarter Value

The 1924-S occupies its own category — simultaneously one of the most structurally flawed strikes of the year and the most expensive when quality does surface. Collectible as low as VF grade, it grows scarcer into gem condition, and anything past MS66 represents a handful of known examples. The typical survivor is well worn, and among Mint State coins, inadequate detail to Liberty’s head and other focal areas — the shield, right leg, and eagle’s breast — is the norm rather than the exception.

That scarcity of quality is precisely what drives auction prices to levels the mintage figures alone don’t justify. A PCGS MS65 FH CAC example sold for $18,600 at Stack’s Bowers in March 2020, and the ceiling climbs significantly from there. The $48,000 result for the MS66 FH — the top auction result in the entire 1924 series — reflects not just grade, but the near-impossibility of finding a San Francisco coin where the strike held together across every diagnostic point simultaneously.

The 1924-S has produced some of the most competitive bidding in the entire Standing Liberty series.

Also Read: 22 Rare Quarter Errors List with Pictures (By Year)

 

Rare 1924 Quarter Error List

Errors on the 1924 quarter don’t announce themselves — most have gone unrecognized for decades, sitting in collections misread as wear damage or poor strikes.

1. Obverse Die Crack

The obverse die cracked early in production at all three mints in 1924, making this one of the most structurally compromised issues in the entire Standing Liberty series. On Philadelphia issues, the crack typically runs across the date area, causing the top portion of the numerals to appear weak or missing entirely — a defect baked into the coin at the moment of striking, not the result of circulation wear.

Known high-grade examples show die cracks running from Liberty’s face toward the lettering, and these specific die states have been documented in auction records and specialist literature. Collectors who pursue die variety attribution treat these cracks as diagnostics — a way to match a specific coin to a specific die state in the production sequence. A well-documented, clearly visible die crack on a 1924 quarter in Fine to AU condition can add a modest premium of $50–$200 over standard values, while mint state examples with dramatic, traceable cracks command significantly more from variety specialists.

2. Off-Center Strike

An off-center strike occurs when the planchet feeds incorrectly into the press, resulting in the design being struck to one side with a blank crescent of unworked metal left exposed on the other. For a coin to carry meaningful premium as an off-center error, it generally needs to be struck at least 5% off center — enough that the edge lettering or rim design is visibly cut off.

On a 1924 Standing Liberty quarter, the critical factor is date visibility: given that 1924 quarters already suffer from chronically weak and incomplete dates due to die failure, an off-center example that still shows a complete “1924” is a double rarity. Coins with a full, readable date are considerably more desirable than those where the date has been pushed entirely off the flan. A 5–15% off-center 1924 quarter with a visible date typically trades between $200–$600, with dramatically shifted examples in better condition reaching well above that at specialist auctions.

3. Die Clash

A die clash occurs when the obverse and reverse dies strike each other directly without a planchet between them, leaving each die bearing a ghost impression of the opposite side’s design. On Standing Liberty quarters, the “E” from “E Pluribus Unum” is one of the most commonly transferred clash marks, appearing as a phantom letter on Liberty’s obverse field — sometimes accompanied by traces of the eagle’s wing or reverse stars flanking her figure.

The 1924 issues, already stressed from die cracking and heavy production demands, were not immune. A die clash on a 1924 quarter is subtle enough that many pass unnoticed in circulated grades, which is precisely why attributed, confirmed examples carry a premium. Depending on the severity of the clash and the coin’s overall condition, values for die clash 1924 quarters generally range from $100 to several hundred dollars above standard market levels, with heavily clashed mint state examples attracting the most competitive bidding.

 

Where to Sell Your 1924 Quarter?

Once you’ve assessed your coins’ value, the next question is where to sell them online with ease. I’ve gathered information on the top selling sites, including their features, strengths, and weaknesses.

Check out now: Best Places To Sell Coins Online (Pros & Cons)

 

FAQ about 1924 Quarter

1. How do I know if my 1924 quarter is from Philadelphia, Denver, or San Francisco?

Look to the left of the date on the obverse, just above Liberty’s lower gown hem. A small “D” identifies Denver, “S” identifies San Francisco. If that space is completely empty, your coin came from Philadelphia — the only mint in the Standing Liberty series that never used a mint mark on any of its production.

This placement is consistent across all 1924 issues, so even on heavily worn coins where the date itself is fading, the mint mark area is usually still legible enough to identify. Getting the mint right is the single most important first step in valuation, since the price difference between a Philadelphia and San Francisco example in the same grade can run into the thousands of dollars.

2. Why do so many 1924 quarters have incomplete or missing dates?

Two separate problems compounded each other in 1924. First, the date was positioned on one of the highest points of the design — a raised step at Liberty’s feet — which made it the first area to lose metal through normal circulation friction. Even brief time in commerce could reduce the numerals to a blur.

Second, the obverse dies at all three mints cracked early in production that year, physically compressing the date area before the coins even left the press. The result is that a fully readable, sharply struck date on a 1924 quarter is genuinely harder to find than most people expect, and coins with strong, complete dates carry a premium that reflects exactly how scarce that combination is. This structural flaw is also what prompted the Mint to recess the date into the design beginning in 1925.

3. What is the Full Head designation, and why does it matter so much?

Full Head is a grading designation applied by PCGS and NGC to Standing Liberty quarters where Liberty’s helmet shows three complete and distinct leaves, a fully outlined helmet base, and a clearly defined ear hole. It sounds like a technical footnote, but in practice it functions as a completely separate market tier.

Because the design’s high relief concentrated metal flow away from the head during striking, most quarters — even uncirculated ones — came off the press with a soft, flat helmet. Coins that do achieve Full Head status are genuinely scarce at every grade level, and the premium reflects that. On a 1924 Philadelphia example, a Full Head coin can be worth three to four times more than a non-FH coin in the same numerical grade. On a 1924-S, the multiplier can be even higher because sharply struck San Francisco examples are rarer still. Third-party certification is essentially required for this designation to carry weight in the market.

4. Is a 1924 quarter with a weak date still worth collecting?

It depends on how weak. A coin where the date is partially faded but still fully attributable to 1924 retains numismatic value, particularly if the overall surface preservation is strong and the coin grades well in other respects. Collectors building circulated sets will accept moderate date weakness as long as all four digits are present and the coin presents well.

A coin where only partial numerals are visible falls into a gray zone — it may still be attributed by a grading service, but it will trade at a meaningful discount. A completely dateless example, however, is generally worth only its silver melt value, which currently runs around $15–$18 depending on the spot price of silver. No collector premium attaches to a coin that cannot be identified by date.

5. What makes the 1924-S more valuable than the Philadelphia issue despite a smaller mintage gap than you might expect?

The answer lies entirely in strike quality rather than mintage. San Francisco was notorious for poorly produced quarters throughout the early 1920s, and 1924 was among its worst years — weak strikes affected not just Liberty’s head but the shield detail and eagle’s feathers simultaneously.

The result is that even high-grade uncirculated survivors rarely meet the Full Head standard, and those that do represent a vanishingly small subset of an already thin population. Philadelphia had more coins produced, but it also had more survivors in presentable condition. The 1924-S has fewer coins overall and far fewer quality coins within that already small pool — that double scarcity is what pushes prices to levels the raw mintage figures wouldn’t otherwise predict.

6. Should I get my 1924 quarter professionally graded?

If your coin appears to be in Fine condition or better with a readable date, professional grading by PCGS or NGC is worth seriously considering. The grading fee — typically $30–$50 for standard service — pays for itself quickly once a coin crosses into the $200+ range, and many 1924 quarters in circulated grades well above Good already exceed that threshold.

Beyond the financial argument, certified coins sell significantly faster, attract more competitive bidding at auction, and protect buyers from counterfeits — which are a documented issue in the Standing Liberty series, particularly for the 1924-S. If your coin shows any signs of potential Full Head detail, grading becomes even more important, since that designation requires third-party authentication to carry weight in the market and can multiply the coin’s value several times over.

7. Can cleaning a 1924 quarter affect its value?

Dramatically and permanently. Coins that have been cleaned — even lightly polished or dipped in chemical solutions — are typically assigned a “Details” grade by PCGS and NGC rather than a numeric Mint State grade. This removes them from the mainstream certified market and suppresses their value considerably, often by 50% or more compared to an equivalent untouched example.

The problem is that cleaning removes or disturbs the original luster, which experienced collectors and auction bidders specifically seek out and pay premiums for. On a coin like the 1924 quarter, where original surfaces are already scarce, any evidence of artificial enhancement is immediately apparent to specialists. If you have a 1924 quarter that appears to be in strong condition, do not clean it under any circumstances before having it assessed by a professional.

8. What’s the difference between a die crack and normal circulation wear on a 1924 quarter?

Die cracks appear as thin raised lines running across the coin’s surface — they stand slightly above the surrounding field because metal flowed into the crack in the die during the strike, creating a ridge rather than a depression. Circulation wear, by contrast, produces flat, smooth areas where metal has gradually been removed through friction, leaving the high points of the design reduced and the surface burnished.

A raised line is almost always a die crack; a flattened or smoothed high point is wear. On 1924 quarters specifically, die cracks most commonly appear running through or near the date area, across Liberty’s body, or through the lettering — all consistent with where the obverse dies were documented to have failed during that year’s production. Identifying and attributing specific die cracks is a specialist pursuit, but even a casual collector can distinguish between the two once they know what to look for under magnification.

9. Why did the 1924-D achieve a higher auction record than many San Francisco examples despite being less famous?

The 1924-D MS67 that sold for $35,250 at Stack’s Bowers in 2013 was extraordinary precisely because virtually no Denver 1924 quarters survive in that grade. The Denver mint’s 1924 output was plagued by broken dies and weak strikes across the board — Liberty’s head, the date, and the shield rivets were all routinely soft — meaning an MS67 example represents a coin that somehow escaped every production problem that defined its entire issue.

At that grade level, the coin isn’t competing with other 1924-D quarters; it’s competing with the concept of what a perfectly preserved, century-old silver coin looks like. The price reflected not just the grade but the near-impossibility of that combination existing, which is a dynamic that consistently produces record results when genuinely exceptional coins come to market regardless of mint.

10. Is the 1924 quarter a good long-term investment?

The raised-date era coins from 1916 to 1924 occupy a specific and well-established position in American numismatics — they are harder to assemble in quality than their post-1925 counterparts, more historically significant as the last examples of a design flaw the Mint ultimately had to correct, and increasingly difficult to source in gem condition as older collections are dispersed and the certified population at the top grades remains thin.

High-grade Full Head examples from all three 1924 mints have shown consistent appreciation over the past two decades, with auction records moving steadily upward for the best-known specimens. That said, investment performance in coins is never guaranteed — condition, authenticity, market timing, and the overall health of the numismatic market all factor into outcomes. The strongest argument for the 1924 quarter as a long-term hold is that the supply of quality examples is genuinely finite and unlikely to grow, while collector demand for the Standing Liberty series remains robust.